Philips CD485 Auto prefix, Network type, Select the recall duration, Dial mode, Set auto prefix

Select [Menu] > > [Recall time], then press [OK] to confirm.

Select an option, then press [OK] to confirm.

»» The setting is saved.

Auto prefix

This feature checks and formats your outgoing call number before it is dialed out.The prefix number can replace the detect number you set in the menu. For example, you set 604 as the detect number and 1250 as the prefix. When you have dialed out a number such as 6043338888, your phone changes the number to 12503338888 when it dials out.

Note

•• The maximum length of a detect number is 5 digits. The maximum length of an auto prefix number is 10 digits.

Set auto prefix

1	Select [Menu] > > [Auto prefix], then
2	press [OK] to confirm.
	Enter the detect number, then press
3	[OK] to confirm.
	Enter the prefix number, then press [OK]

to confirm.

»» The setting is saved.

Note

•• To enter a pause, press and hold .

Note

•• If the prefix number is set and the detect number is left empty, the prefix number is added to all outgoing calls.

Note

•• The feature is unavailable if the dialed number starts with * and .

Network type

Note

•• This feature only applies to models with network type support.

1 Select [Menu] > > [Network type], then press [OK].

2 Select a network type, then press [OK]. »» The setting is saved.

Select the recall duration

Ensure that the recall time is set correctly before you can answer a second call. In normal case, the phone is already preset for the recall duration.You can select among 3 options: [Short], [Medium] and [Long].The number of available options varies with different countries. For details, consult your service provider.

1

2

Dial mode

Note

•• This feature only applies to models that support both tone and pulse dial.

Dial mode is the telephone signal used in your country.The phone supports tone (DTMF) and pulse (rotary) dial. Consult the service provider for detailed information.

30EN