Set the dial mode
1 Select [Menu] > 
> [Dial mode], then press [OK] to confirm.
2 Select a dial mode, then press [OK] to confirm.
»» The setting is saved.
Note
•• If your phone is in pulse dial mode, press * during a call for temporary tone mode. Digits entered for this call are then sent out as tone signals.
First ring
If you have subscribed to the caller ID service with your service provider, your phone can suppress the first ring before the caller ID displays on the screen. After the phone is reset, it can detect automatically if the caller ID service is subscribed and start to suppress the first ring.You can change this setting to suit your preference.This feature only applies to models with first ring support.
Turn the first ring on/off
1 Select [Menu] > 
> [First ring], then press [OK] to confirm.
2 Select [On]/[Off], press [OK] to confirm. »» The setting is saved.
Note
•• To reset the first ring status, go to the reset menu.
Auto clock
Note | English |
|
•• This service is network dependent.
Note
•• Ensure you have the caller ID service before you have this feature.
It synchronizes the date and time on your phone with the public switched telephone network (PSTN) automatically. For the date to be synchronized, ensure the current year is set.
Set the Auto clock on/off
1 Select [Menu] > 
> [Auto clock], then press [OK] to confirm.
2 Select [On]/[Off], press [OK] to confirm. »» The setting is saved.
Note
•• To reset the first ring status, go to the reset menu.
Register the handsets
You can register additional handsets to the base station.The base station can register up to 5 handsets.
EN 31