Philips XL390 Get started, Connect the base station and charger, Telephone socket on the wall

Page 11

3 Get started

Caution

•• Make sure that you have read the safety instructions in the ‘Important safety instruction’ section before you connect and install your handset.

Connect the base station and charger

Warning

•• Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or underside of the phone.

•• Use only the supplied power adapter to charge the batteries.

Note

•• If you subscribe to the digital subscriber line (DSL) high speed internet service through your telephone line, make sure you install a DSL filter between the telephone line cord and the power socket..The filter prevents noise and caller ID problems caused by DSL interference. For further information on DSL filters, contact your DSL service provider.

•• The type plate is located on the bottom of the base station.

1 Connect each end of the power adapter to:

•the DC input jack at the back of the base station;

•the power socket on the wall.

2 Connect each end of the line cord to:

•the telephone socket at the back of the base station;

•the telephone socket on the wall.

English

EN 9

Image 11

Contents Always there to help you Page Contents Network services Phone settingsAlarm clock ServicesTo avoid damage or malfunction Important safety InstructionsPower requirements Battery life may be shorter in low temperature conditions Quick start guide What is in the boxYour phone Congratulations on your purchase and welcome to Philips Press and hold to enter a pause Overview of the phoneOr off Overview of the baseStation Above the key Find handsetsDisplay icons It flashes when there is a new voice messageSilent mode is activated ECO mode is activated Telephone socket on the wall Get startedConnect the base station and charger Connect each end of the line cord to10 EN Install the handsetPower socket on the wall Set the date and time Configure your phone country dependentSet the country/language »»The handset starts charging Change the remote access PIN codeCharge the handset Select Menu Answ. MachineCheck the signal Strength Check the battery levelQuick call CallsMake a call Call through the direct keyEnd a call Answer a callMake a second call Adjust the earpiece/ speaker volumeMute the microphone Turn the speaker on or offMake a conference call with external callers Switch between two callsMake a conference call Switch between callsMake a call to another handset Transfer a callDuring the conference call During an external callEnter text and numbers Switch between uppercase and lowercaseCall from the phonebook PhonebookView the phonebook Search a recordDelete a record Add a recordEdit a record Select Menu Phonebook Delete all, then press OK to confirm Delete all recordsDirect keys Set the direct keysSelect the call list type Call logCall list type Delete a call record View the call recordsSave a call record to the phonebook Return a callRedial list Sound settings Set the date and time ECO modeName the handset Set the backlight of the LCD screenWhen the alarm rings Alarm clockSet the alarm Turn off the alarmAuto prefix ServicesAuto conference Network typeSet auto prefix Dial modeSelect the recall Duration32 EN Set the dial modeSelect Menu Services Register, then press OK to confirm Register the handsetsUnregister the handsets Restore default settingsSelect Menu Services Unregistered, then press OK to confirm Select Menu Services Reset, then press OK to confirmCall return Network servicesCall forward Hide your identity Call back serviceThrough the base Confirm »»The setting is savedTurn the answering machine on or off Through the handsetAnnouncement, then press OK to confirm AnnouncementsRecord an announcement 38 EN Listen to the announcementTo start/Stop listening, press Incoming messages ICM40 EN Set the ring delayDelete an incoming message Permanently deletedChange the PIN code Remote accessActivate/deactivate the remote access Enter # when you hear the announcement Enter your PIN code Access the answering machine remotelyDisplay Technical data44 EN Declaration of conformityCompliance with EMF Disposal of your old product and batteriesEnvironmental information Questions Service is not activated. Check with your service provider Lativian/Bulgarian AppendixText and number input tables Key Upper case characters forEnglish GAP IndexPIN Phone Overview Set up Phone settings Phonebook 21, 250168

Related manuals

Manual 44 pages 27.89 Kb