17Frequently asked
questions
No signal bar is displayed on the screen.
•• The handset is out of range. Move it closer to the base station.
•• If the handset displays [Unregister], register your handset.
Tip
•• For further information, see chapter ‘Service’, section ‘Register the handsets’.
I have chosen a wrong language which I cannot read, what do I do?
1 Press 
to go back to the standby screen.
2 Press 
to access the main menu screen.
3 One of the following options will appear on the screen:
[Phone setup] > [Language]
[Réglages] > [Langue]
[Config. telef.] > [Lingua]
4 Select it to access the language options.
5 Select your own language.
If I fail to register the additional handsets to the base station, what do I do?
Your base memory is full. Unregister the unused handsets and try again. No dialing tone
•• Check your phone connections.
•• The handset is out of range. Move it closer to the base station.
No docking tone
•• The handset is not placed properly on the base station/charger.
•• The charging contacts are dirty. Disconnect the power supply
first and clean the contacts with a
damp cloth.
I cannot change the settings of my voice mail, what do I do?
The voice mail service is managed by your service provider but not the phone itself. Contact your service provider to change the settings.
The handset on the charger does not charge.
•• Make sure the batteries are inserted correctly.
•• Make sure the handset is placed
properly on the charger.The battery icon animates when charging.
•• Make sure the docking tone setting
is turned on.When the handset is placed correctly on the charger, you can hear a docking tone.
•• The charging contacts are dirty. Disconnect the power supply
first and clean the contacts with a
damp cloth.
•• Batteries are defective. Purchase new ones from your dealer.
46EN