Philips CD480, CD485 user manual Set the answer mode, Announcements, Record an announcement

Select [Menu] > > [Voice answer], then press [OK] to confirm.

Select an answer mode, then press [OK] to confirm.

»» The setting is saved.

Set the answer mode

You can set the answering machine and select if the callers can leave messages. Select [Record also] if you allow the callers to leave messages. Select [Answer only] if you forbid the callers to leave messages.

1

2

Note

•• If the memory is full, the answering machine switches to [Answer only] mode automatically.

Announcements

The announcement is the message your caller hears when the answering machine picks up the call.The answering machine has 2 default announcements: the [Record also] mode and [Answer only] mode.

Record an announcement

The maximum length of the announcement		lish
you can record is 3 minutes. The newly		Eng
recorded announcement automatically
replaces the old one.
1	Select [Menu] > > [Announcement],
2	then press [OK] to confirm.
	Select [Record also] or [Answer only],
3	then press [OK] to confirm.
	Select [Record new], then press [OK] to
4	confirm.
	Recording starts after the beep.
5	Press [OK] to stop recording or the

recording stops after 3 minutes.

»» You can listen to the newly recorded announcement on the handset.

Note

•• Ensure that you speak close to the microphone when you record an announcement.

Listen to the announcement

1 Select [Menu] > > [Announcement], then press [OK] to confirm.

2 Select [Record also] or [Answer only], then press [OK] to confirm.

3 Select [Play], then press [OK] to confirm. »» You can listen to the current

announcement.

Note

•• You can no longer listen to the announcement when you pick up an incoming call.

EN 37