Philips CD485, CD480 user manual Change the PIN code, Remote access commands

Page 40

Select [Menu] > > [Remote access], then press [OK] to confirm.

Select [Activate] / [Deactivate], then press [OK] to confirm.

»» The setting is saved.

Change the PIN code

1	Select [Menu] > > [Remote access]
	> [Change PIN], then press [OK] to
2	confirm.
2	Enter the old PIN, then press [OK] to
3	confirm.
3	Enter the new PIN code, then press [OK]
4	to confirm.
4	Enter the new PIN code again, then press

[OK] to confirm.

»» The setting is saved.

Activate/deactivate the remote access

You can allow or block remote access to the answering machine.

1

2

Access the answering machine remotely

1 Make a call to your home number with a touch tone phone.

2 Enter # when you hear the announcement.

3 Enter your PIN code.

»» You now have access to your answering machine, and you can now listen to the new messages.

Note

•• You have 2 chances to enter the correct PIN code before your phone hangs up.

4 Press a key to carry out a function. See the Remote access commands table below for a list of available functions.

Note

•• When there is no message, the phone hangs up automatically if no key is pressed for 8 seconds.

Remote access commands

Key Function

1Repeat the current or listen to the previous message.

2Listen to messages.

3Skip to the next message.

6Delete the current message.

7Switch the answering machine on.

(not available when you listen to the messages).

8Stop listening to the message.

9Switch the answering machine off.

(not available when you listen to the messages).

Behavior of the LED display on the base station

The table below shows you the current status with different LED display behavior on the base station.

	LED		Answering	Message status
	display		machine
			status
	No		Off	--
	display
			On	No message

			On	Steady on: message full
				with 3 new messages
			On	Flashing: memory full

			On	Scrolling when recording
				the incoming message or
				announcement.
			On	Displays the volume
				level.
			On	Flashing: remote access/
				listen to messages from
				the handset

40EN

Image 40

Contents Register your product and get support at CD480 CD485EC Declaration of Conformity Contents Set the answer mode Announcements Incoming messages ICM Telephone answering machinePower requirements When using the phone as a baby monitor60950 To avoid damage or malfunctionAbout operating and storage temperatures What is in the box Power adapter Line cord Guarantee Quick start guideCongratulations on your purchase and welcome to Philips Base station CD480 Base station CD485 Handset ChargerSet the dial mode pulse mode or temporary tone mode Overview of the phoneEarpiece Make and receive callsOverview of the base station Main menu iconsCD480 Message counterIt flashes when there is a new missed call It flashes when there is a new voice messageSilent mode is activated ECO The ECO mode is activated Display iconsGet started Connect the base station and chargerInstall the handset Set the country/languageSet the date and time Set the date and time formatCheck the battery level What is standby mode?Check the signal strength Charge the handsetCalls Make a callAdjust the earpiece volume End a callAnswer a call Mute the microphoneTurn the speaker on or off Make a second callToggle between two calls Answer a second callMake a call to another handset Transfer a callMake a conference call While you are on the phoneDuring an external call During the conference callText and numbers Enter text and numbersSwitch between uppercase and lower case Access the phonebook during a call PhonebookView the phonebook Search a recordAdd a record Edit a recordDelete a record Set the melodyCall log View the call recordsSave a call record to Phonebook Delete a call recordDelete all call records Return a callRedial list Phone settings Sound settingsName the handset Set the display languageDisplay settings ECO modeSilent mode Set the sound profileAlarm clock Set the alarmTurn off the alarm When the alarm ringsServices Auto conferenceManage the carrier code Manage the area codeDial mode Auto prefixNetwork type Select the recall durationAuto clock First ringRegister the handsets Call services Unregister the handsetsAuto registration Manual registrationCall the return service centre Edit the call return service centre NumberCall back service Cancel the call back serviceRestore default settings Edit the ID withheld codeBaby monitor Activate the baby monitorSend an alert Set the baby cry levelPress to turn on/off the answering machine in standby mode Turn on/off the answering machineSet the answering machine language Through the handsetSet the answer mode AnnouncementsRecord an announcement Listen to the announcementRestore the default announcement To start/stop listening, press To adjust the volume, pressIncoming messages ICM Listen to the incoming messagesSet the ring delay Remote accessDelete all old incoming messages Call screeningRemote access commands Change the PIN codeDefault settings Country dependent Receiver volume VolumeRing delay Rings Speaker volume Level Language Country dependent Handset nameTechnical data Frequently asked questions Handset does not ringDeclaration of conformity English 46 EN 1999/5/EC Richtlijn 1999/5/EG1999/5/CE Som framgår av direktiv 1999/5/EG0979

Related manuals

Manual 48 pages 21.39 Kb