Philips CD290 ECO mode, Name the handset, Set the date and time, Set the display language

Set the sound profile

You can set the sound in the earpiece among 3 different profiles.

1 Select [Menu] > [Phone setup] > [Sounds]

>[My sound], then press [OK] to confirm.

2 Select a profile, then press [OK] to confirm.

»»The setting is saved.

Access the sound profile during a call

1 Press [Sound] for once or several times to

change the sound profile during a call.

ECO mode

The ECO mode reduces the transmission power of the handset and base station when you are on a call or when the phone is in standby mode.

1	Select [Menu] > [Phone setup] > [Eco
2	mode], then press [OK] to confirm.
	Select [On]/[Off], and press [OK] to

confirm.

»»The setting is saved.

»»is displayed in standby mode.

Note

•• When ECO is set to [On], the connection range between the handset and the base station can be reduced.

Name the handset

The name of the handset can be up to 14 characters. It is displayed on the handset screen in standby mode.

1	Select [Menu] > [Phone setup] > [Phone
2	name], then press [OK] to confirm.
	Enter or edit the name.To erase a character,
3	select [Clear].
	Press [OK] to confirm.
	»»The setting is saved.

Set the date and time

For information, see 'Set the date and time' in the Get started section.

Set the display language

Note

•• This feature only applies to models with multiple- language support.

•• Languages available for selection vary with different countries.

1	Select [Menu] > [Phone setup] >
2	[Language], then press [OK] to confirm.
	Select a language, then press [OK] to
	confirm.

»»The setting is saved.

24EN