Philips DECT 211 manual Screening the calls while a message is being left

✦Recording your personal outgoing message

speak after the beep *

To exit

However, if you do so, you will permanently erase the pre-recorded outgoing message.

✦Recording a memo

If you want to leave a local message for your family :

speak after the beep

To exit

✦Selecting the answerphone mode

You can select either answering mode only (which plays an outgoing message but does not take messages) or answering & recording mode (which takes messages.)

	or
	to switch between modes To exit
answering &	answering only mode
recording mode

*You will hear the personal outgoing message.

This local message (memo) is treated like all other answerphone messages.

Advice: prior to using the answering-only mode, make sure that you have adapted the outgoing message.

Screening the calls while a message is being left

This allows you to listen to any caller leaving a message and to decide whether or not to take the call.

✦Activating call screening

From the handset :

✦Deactivating call screening From the handset :

✦Increasing the volume of the call screening

During call screening, the volume can be adjusted. 4 volume levels are available, including silent.

Press until you have reached the desired volume.

✦Call interception

The recording of the current message is stopped and the call is taken.

The last selected level will be registered for the next call.

When the answerphone is on-line, blinks.

10www.philips.com/faqs/dect