✦ Answerphone troubleshooting.....
PROBLEMS
-Answerphone icon is blinking on the display.
-The answerphone has not recorded your outgoing message.
-The answerphone has stopped.
CAUSES
The answerphone memory is full
The answerphone memory is full.
The answerphone memory is full.
SOLUTIONS
Consult and delete messages to free sufficient memory. (p 9)
Consult and delete messages to free sufficient memory. (p 9)
Consult and delete messages to free sufficient memory. (p 9)
✦Declaration of Conformity :
We,
PHILIPS Consumer Electronics Route d'Angers
72081 Le Mans Cedex 9 France
Declare that the products DECT211xx and DECT 215xx are in compliance with ANNEX III of the R&TTE- Directive 1999/5/EC and then with the following essential requirements :
Article 3.1 a : (protection of the health & the safety of the user) EN
Article 3.1 b : (protection requirements with respect to electromagnetic compatibility) ETSI EN 301
Article 3.2 : (effective use of the radio spectrum) EN 301 406 (2003)
The presumption of conformity with the essential requirements regarding Council Directive 1999/5/EC is
ensured. |
|
Date : 24/02/2004 | Le Mans |
Quality Manager
DECT & Home Telephony
The product can only be connected to the analogue telephone network in the countries indicated on the back cover of this manual.
The 
marking certifies compliance with technical regulations in
accordance with the Directive 1999/5/EC for the safety of the user, electromagnetic perturbations and for radio spectrum.
16www.philips.com/faqs/dect