Panasonic SC-HT67 warranty Using the disc manager, Program play/Random play

Soundtracks

During play

Press [AUDIO].

The number changes each time you press the button.

	ÎDigital
1	English	3/2.1 ch

≥You can also use this button to turn the vocals on and off on karaoke discs. Read the disc’s instructions for details.

≥Refer to [B] on page 17 for audio signal type details. ≥[VCD]

Audio changes as follows each time you press [AUDIO]:

LR>L>R

^--------------}

This may not work with some discs.

Angles

“ANGLE” lights on the unit’s display when this is available.

During play

Press [ANGLE].

The number changes each time you press the button.

1 2

Using the disc manager

[CD] [VCD]

The disc manager allows you to choose one track or disc to play or to play all five discs in succession.

1 While stopped

Press [DISC MANAGER] to select the desired method.

Each time you press the button:

T(1-TRACK): One track play

Program play/Random play

[CD] [VCD]

While stopped

Press [PLAY MODE] to select the play mode.

The mode changes as follows each time you press the button.

	Program play	Random play
	DISC
	PRGM	RANDOM
	Normal play	All disc random play
		ALL DISC
		RANDOM	operations
After selecting the mode, follow the steps for the mode.
	Program play
To play a maximum of 24 tracks in a programmed order
			Disc
Select tracks from any disc.
1 Press [DISC] and [1]–[5] to select the
	disc.
2 Press the numbered buttons to select
	a track.
	≥Repeat steps 1 and 2 to program other tracks.
	≥Step 1 is unnecessary when programming tracks on the
	same disc.
3 Press [1] (PLAY).
	Play now begins in the programmed sequence.
When play is stopped and the program contents are shown on
the display, you can also do the following.
≥To add tracks
	Repeat steps 1 and 2.
≥To check program contents
	Press [:] or [9].
≥To clear tracks
	Press [CANCEL] to clear the last track in the program, or press
	[:] or [9] to select a track and press [CANCEL].
≥To clear the whole program
	Press [∫] so “CLEAR” is displayed. (If “CLEAR” is not displayed,

A

(1-DISC): Plays one disc.

(ALL-DISC): Plays five discs in succession.

start and stop play, then press [∫] again.)

Note

Discs or tracks the unit cannot find can be programmed but are can-

celed during play. This is also the case if you program DVD-Video

ALL DISC

(NORMAL): Normal play (off)

2 Select the disc and track.

≥When selecting “1-DISC”, press [DISC] and [1]–[5].

≥When selecting “1-TRACK”,press the numbered buttons.

To select a 2-digit number

Example: To select track 23: press [S10/ENTER] ➡ [2] ➡ [3].

You can also select the track by pressing [:] and [9].

3 Press [1] (PLAY).

To cancel disc manager

Press [∫].

To play a track or disc repeatedly

Press [REPEAT] during disc manager play.

Note

≥You cannot use the disc manager while “RANDOM” or “PRGM” are on. ≥When playing video CDs with playback control in the “A” or “ALL DISC” mode, you can play the disc without having to operate the disc’s menus. ≥The disc manager skips any DVD and MP3 discs that are loaded.

and MP3 discs.
Random play
To play tracks on the current disc randomly
Press [1] (PLAY).
Play now begins in random order.
All disc random play
To play tracks on all discs randomly
Press [1] (PLAY).
Play now begins in random order.
≥DVD and MP3 discs are skipped during all disc random play.
Normal play
The program or random mode is canceled (normal play mode is re-
stored) when:
–The unit is turned off.
–The disc is changed or removed.	15
–A source other than DVD/CD is selected.
The program is retained in memory.	RQT6191