Note
The default setting for first ring detection is On. The setting automatically switches to Off when you receive a call containing caller line identification. However, this occurs only if you do not first manually change the setting. (It does not change automatically
if you manually change the first ring setting even once.)
10.14 Default Settings
Parameter | Default Value |
Ring Volume | Level 3 |
Ring Tone | Ring 1 |
Earpiece | Level 3 |
Volume |
|
Speaker | Level 3 |
Volume |
|
Key Beep | On |
Display | English |
Language |
|
Wallpaper | Wallpaper 1 |
Color | Color 1 |
Theme |
|
Display | Level 3 |
Contrast |
|
Backlight | 20 Seconds |
Time |
|
Auto Hang- | On |
Up |
|
Handset | Philips |
Name |
|
Time/Date | MM/DD 12Hours |
Format |
|
Time/Date | 00:00 01/01/2008 |
Set Alarm | Off |
Alarm Tone | Bell 2 |
Network Service
Parameter | Default Value |
Dial Mode | Tone |
Flash Time | Long |
PIN Code | 0000 |
Call Barring | Off |
Call Barring | Cleared |
Number |
|
XHD Sound | On |
Easy Call | Off |
Easy Call | Cleared |
Number |
|
Auto Prefix | Cleared |
Set First Ring | On |
Phonebook | After a reset, |
Memory | phonebook is |
| maintained as it was just |
| before the reset |
Redial | Cleared |
Memory |
|
CLI Memory | Cleared |
Network | Empty (no preset |
Service | numbers) |
Auto | On |
Conference |
|
11 Network Service
The network service functions provide a convenient way for you to access some network provider services. Subscriptions are required in order to benefit from these services. Contact your network provider for details. Depending on your subscribed network, some of the services and menus described in this
53