Phonebook entry cannot be stored and Memory Full is displayed!
•Delete an entry to free memory before saving your contact again.
The PIN code is wrong!
•The default PIN is 0000.
•Reset the handset to revert to the default PIN code if it has been changed before (see “Reset Unit” - Section 10.8).
The answering machine does not record calls.
•Make sure the answering machine is connected to the power adaptor, and the power adaptor is plugged into mains supply which is switched on.
•Check if the answer machine is off, or Answer only mode is selected.
•Check to see if the answering machine is memory full. If so, delete some or all messages.
•Try switching off the power at the mains socket, and then turn it on again after 1 minute.
Unable to perform remote operation
•Make sure the remote access is on (see Section 12.6.2).
•Make sure you entered the correct remote access code.
•Use a
Note
If the above solutions do not help, remove the power from both the handset and the base. Wait for 1 minute and try again.
Frequently asked questions | 67 |