Philips UCZZ01927AB, SE250 Press m in idle mode, scroll n to Advanced SET and press o, Set Prefix

Page 33

Warning

Upon reset, all your personal settings, call log and redial list entries will be deleted and the phone will return to its default settings. However, your phonebook will remain unchanged after reset.

Note

You may have to configure your phone once again. In this case the WELCOME mode will appear again after reset. (Go to chapter 3.3)

1Press m in idle mode, scroll n to ADVANCED SET and press o,

scroll n to RESET and press o.

2CONFIRM? is displayed on the

screen.

3Press o again to confirm.

•A validation tone is emitted.

•The unit is reset to its default settings. (See “Default settings” on page 32)

2DETECT DIGIT is displayed on

the screen. Press o to enter.

•The last stored detect string is displayed (if any).

3Enter a detect string number

(maximum 5 digits) and press o to confirm.

4PREFIX is displayed on the screen. Press o to enter.

•The last stored prefix number is displayed (if any).

5Enter the prefix number (maximum 10 digits) and press o to confirm.

•SAVED is displayed and the screen returns to idle screen.

Note

If no detect string (blank) is entered, the prefix number will be automatically added to the predial number after t is pressed.

For numbers starting with *, # or P, the prefix number will not be added to the predial number after t is pressed.

7.6Set Prefix

This feature allows you to define a prefix number to be added to the beginning of a number during predialling (see “Predialling” on page 17). You may also use this feature to add a detect string to match and replace the first few digits of the number during predialling.

You can enter up to a maximum of 5 digits for the detect string and 10 digits for the auto prefix number.

1Press m in idle mode, scroll n to ADVANCED SET and press o, scroll n to AUTO PREFIX and press o.

7.7Change Recall time

Recall time (or dial delay) is the time delay by which the line will be disconnected after you press t key. It can be set to short or long.

The default value of recall time that is preset in your handset should be the best suited for your country network and therefore you should not need to change it.

1Press m in idle mode, scroll n to ADVANCED SET and press o.

2Scroll n to RECALL TIME and press o

Advanced settings

31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents CD250 SE250 Page Table of contents Personal settings Advanced settingsTechnical data Frequently asked Questions33 Joden Power requirementsConformity Using GAP standard complianceUse one of the following disposal options Electric, Magnetic and Electromagnetic Fields EMFBatteries Guarantee AAA rechargeable Power supplyYour phone Congratulations on your purchase and welcome to PhilipsOK key o Overview of your phone Earpiece DisplayBack/Clear key c Navigation keys nBattery door Menu key m Idle mode Go to the main menu. I Redial key rLoudspeaker key l Number keysReplace with batteries of the correct type Display iconsOverview of the base station Paging key a Page handset Long press to start registration procedureWall mounting the base SE250 only Getting startedInstall your phone Install batterySlide out the battery cover Charge battery Welcome modeTip Press o to confirm your Selection Using multipacksMenus Menu structureEnter date Enter time Using your phone Enter a Dialing Pause Call using Direct Access MemoryAnswer a call Handsfree answeringUse more of your phone Press d in idle mode and scroll n to browse the phonebook Access phonebookStore a contact in the phonebook DigitsDirect Access Memory 6.1 Add/Edit Direct Access MemoryDelete Direct Access Memory Access Redial list Using the Redial listBe displayed instead Press c to return to idle mode Save a redial number into the phonebookUsing the Call log Delete all redial numbers Press r in idle mode and press oAccess the Call log Save call list entry into the phonebookDelete a call list entry Using the IntercomDelete all call list entries Intercom another handset NoteAnswer an external call during intercom Switch between an internalEstablish a three-party conference call PagingSet Date and Time Each digit blinks to indicate dial outSet Time and Date Format Set Time Format Or 24HOURSSet Alarm Personal settingsHandset Tones Set the Ring Volume Melody 2 or Melody 3 and press o to confirmSet the Ring Melody Press m in idle mode, scroll n toThere are 10 ring melodies available on your handset Activate/Deactivate Key BeepPress m in idle mode, scroll n to Personal SET and press o Advanced settingsChange PIN RegisterUnregister Reset UnitSelect Country Press o Scroll n to the country of your Choice and press oSet Prefix Press m in idle mode, scroll n to Advanced SET and press oChange Recall time Scroll n to Recall Time and press oChange the Dial Mode Default settings Parameter Default ValueSet First Ring Detection Parameter Default Value Technical dataCD250 SE250Handset does not charge Connection Handset does not switch onIcon is not blinking during charge Communication is lost during a callCannot change the settings of my voice mail Handset warms up when making a long callMy handset keeps going into idle mode Product behaviour Keypad does not workIndex Index

UCZZ01927AB, SE250 specifications

Philips SE250, UCZZ01927AB is an innovative audio solution designed to enhance the listening experience for users seeking high-quality sound performance and user-friendly features. As part of Philips' extensive range of audio products, the SE250 focuses on delivering clear audio and robust connectivity options, making it a sought-after choice for music enthusiasts, gamers, and professionals alike.

One of the standout features of the SE250 is its advanced audio technology that ensures immersive sound quality. Equipped with high-definition audio drivers, the device produces a rich and balanced sound across various frequency ranges. Whether you're listening to classical music, engaging in gaming sessions, or watching movies, the SE250’s sound performance is tailored to provide crisp highs and deep lows, ensuring an overall satisfying auditory experience.

In addition to its superior sound quality, the Philips SE250 also boasts versatile connectivity options. It supports multiple input sources, including Bluetooth, AUX, and USB, allowing users to connect their devices seamlessly, whether through wired connections or wirelessly. The Bluetooth feature enables an easy connection to smartphones, tablets, and laptops, making it convenient for users to stream their favorite content without the hassle of cables.

Another noteworthy characteristic of the SE250 is its ergonomic design. The device is crafted for comfort and usability, featuring intuitive controls that allow users to adjust volume levels, switch tracks, and manage calls effortlessly. The lightweight and portable construction adds to its appeal, making it an ideal companion for travel, outdoor activities, or daily commutes.

Moreover, the Philips SE250 is built with durability in mind, featuring high-quality materials that withstand daily wear and tear. This ensures longevity while maintaining aesthetic appeal.

Combined with excellent battery life, the SE250 allows for extended usage without frequent recharging, catering well to the needs of users who are always on the go.

In conclusion, the Philips SE250, UCZZ01927AB is a remarkable audio device that stands out due to its impressive sound quality, versatility in connectivity, ergonomic design, and durability. Whether for personal enjoyment or professional use, it offers features that cater to a wide range of audio needs and preferences.
Top Page Image Contents