Philips UCZZ01927AB, SE250 manual Power requirements, Joden

Page 5

1 Important

Take time to read this user manual before you use your phone. It contains important information and notes regarding your phone.

1.1Power requirements

•This product requires an electrical supply of 100-240 volts AC. In case of power failure, communication can be lost.

•The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible.

•The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard

EN 60-950.

Warning

To avoid damage or malfunction:

•Do not allow the charging contacts or the battery to come into contact with metal objects.

•Never use any other battery than the one delivered with the product or recommended by Philips: risk of explosion.

•Always use the cables provided with the product.

•Handsfree activation could suddenly increase the volume in the earpiece to

a very high level: make sure the handset is not too close to your ear.

•This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls.

•Do not expose the phone to excessive heat caused by heating equipment or direct sunlight.

•Do not drop your phone or allow objects to fall on your phone.

•Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these may harm the set.

•Do not use the product in places where there are explosive hazards.

•Do not let small metal objects come into contact with the product. This can deteriorate audio quality and damage the product.

•Active mobile phones in the vicinity may cause interference.

•Do not open your product as you could be exposed to high voltages.

•Do not allow the charger to come into contact with liquids.

•Use only with provided batteries.

•Rechargeable batteries information Ni-MH battery, AAA × 2, 1.2V, 600mAh

•Use only with provided power supply.

•Power supply information for base station

Input: AC100-240V/0.3A, 50Hz/60Hz

Output: DC6V/0.5A JOD-SWR-07342

JODEN

Important

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents CD250 SE250 Page Table of contents Technical data Frequently asked Questions33 Personal settingsAdvanced settings Joden Power requirementsConformity Using GAP standard complianceUse one of the following disposal options Electric, Magnetic and Electromagnetic Fields EMFBatteries Guarantee AAA rechargeable Power supplyYour phone Congratulations on your purchase and welcome to PhilipsOK key o Overview of your phone Earpiece DisplayBack/Clear key c Navigation keys nBattery door Menu key m Idle mode Go to the main menu. I Redial key rLoudspeaker key l Number keysReplace with batteries of the correct type Display iconsOverview of the base station Paging key a Page handset Long press to start registration procedureWall mounting the base SE250 only Getting startedSlide out the battery cover Install your phoneInstall battery Tip Charge batteryWelcome mode Press o to confirm your Selection Using multipacksMenus Menu structureEnter date Enter time Using your phone Enter a Dialing Pause Call using Direct Access MemoryAnswer a call Handsfree answeringUse more of your phone Press d in idle mode and scroll n to browse the phonebook Access phonebookStore a contact in the phonebook DigitsDelete Direct Access Memory Direct Access Memory6.1 Add/Edit Direct Access Memory Access Redial list Using the Redial listBe displayed instead Press c to return to idle mode Save a redial number into the phonebookUsing the Call log Delete all redial numbers Press r in idle mode and press oAccess the Call log Save call list entry into the phonebookDelete a call list entry Using the IntercomDelete all call list entries Intercom another handset NoteAnswer an external call during intercom Switch between an internalEstablish a three-party conference call PagingSet Date and Time Each digit blinks to indicate dial outSet Time and Date Format Set Time Format Or 24HOURSSet Alarm Personal settingsHandset Tones Set the Ring Volume Melody 2 or Melody 3 and press o to confirmSet the Ring Melody Press m in idle mode, scroll n toThere are 10 ring melodies available on your handset Activate/Deactivate Key BeepPress m in idle mode, scroll n to Personal SET and press o Advanced settingsChange PIN RegisterUnregister Reset UnitSelect Country Press o Scroll n to the country of your Choice and press oSet Prefix Press m in idle mode, scroll n to Advanced SET and press oChange Recall time Scroll n to Recall Time and press oSet First Ring Detection Change the Dial ModeDefault settings Parameter Default Value Parameter Default Value Technical dataCD250 SE250Handset does not charge Connection Handset does not switch onIcon is not blinking during charge Communication is lost during a callCannot change the settings of my voice mail Handset warms up when making a long callMy handset keeps going into idle mode Product behaviour Keypad does not workIndex Index

UCZZ01927AB, SE250 specifications

Philips SE250, UCZZ01927AB is an innovative audio solution designed to enhance the listening experience for users seeking high-quality sound performance and user-friendly features. As part of Philips' extensive range of audio products, the SE250 focuses on delivering clear audio and robust connectivity options, making it a sought-after choice for music enthusiasts, gamers, and professionals alike.

One of the standout features of the SE250 is its advanced audio technology that ensures immersive sound quality. Equipped with high-definition audio drivers, the device produces a rich and balanced sound across various frequency ranges. Whether you're listening to classical music, engaging in gaming sessions, or watching movies, the SE250’s sound performance is tailored to provide crisp highs and deep lows, ensuring an overall satisfying auditory experience.

In addition to its superior sound quality, the Philips SE250 also boasts versatile connectivity options. It supports multiple input sources, including Bluetooth, AUX, and USB, allowing users to connect their devices seamlessly, whether through wired connections or wirelessly. The Bluetooth feature enables an easy connection to smartphones, tablets, and laptops, making it convenient for users to stream their favorite content without the hassle of cables.

Another noteworthy characteristic of the SE250 is its ergonomic design. The device is crafted for comfort and usability, featuring intuitive controls that allow users to adjust volume levels, switch tracks, and manage calls effortlessly. The lightweight and portable construction adds to its appeal, making it an ideal companion for travel, outdoor activities, or daily commutes.

Moreover, the Philips SE250 is built with durability in mind, featuring high-quality materials that withstand daily wear and tear. This ensures longevity while maintaining aesthetic appeal.

Combined with excellent battery life, the SE250 allows for extended usage without frequent recharging, catering well to the needs of users who are always on the go.

In conclusion, the Philips SE250, UCZZ01927AB is a remarkable audio device that stands out due to its impressive sound quality, versatility in connectivity, ergonomic design, and durability. Whether for personal enjoyment or professional use, it offers features that cater to a wide range of audio needs and preferences.
Top Page Image Contents