14Frequently asked questions
No signal bar is displayed on the screen.
•• The handset is out of range. Move it closer to the base station.
•• If the handset displays [Register your Handset], register your handset.
Tip
•• For further information, see the chapter 'Services', section 'Register additional handsets'.
My handset is in searching status, what do I do?
•• Make sure that the base station has power supply.
•• Register the handset to the base station.
•• Move the handset closer to the base station.
If I fail to pair (register) the additional handsets to the base station, what do I do? Your base memory is full. Unregister the unused handsets and try again.
Tip
•• For further information, see the chapter 'Services', section 'Unregister the handsets'.
I have chosen a wrong language which I cannot | |
read, what do I do? | |
1 | Press to go back to the standby screen. |
2 | Press MENU/OK to access the main menu |
3 | screen. |
One of the following texts appear on the | |
screen:
No dialing tone
•• Check your phone connections.
•• The handset is out of range. Move it closer to the base station.
No docking tone
•• The handset is not placed properly on the base station/charger.
•• The charging contacts are dirty. Disconnect the power supply first and clean the contacts with a damp cloth.
I cannot change the settings of my voice mail, what do I do?
The voice mail service is managed by your service provider but not the phone itself. Contact your service provider to change the settings.
The handset on the charger does not charge.
•• Make sure the batteries are inserted correctly.
•• Make sure the handset is placed properly on the charger.The battery icon animates when charging.
•• Make sure the docking tone setting is turned on.When the handset is placed correctly on the charger, you can hear a docking tone.
•• The charging contacts are dirty. Disconnect the power supply first and clean the contacts with a damp cloth.
•• Batteries are defective. Purchase new ones with the same specifications.To remove the battery door, refer to the instruction in the following picture.
No display
•• Make sure the batteries are charged.
•• Make sure there is power and the phone is connected.
Bad audio (crackles, echo, etc.)
EN 29