Philips Get Started with Your Cordless Telephone
Page 9

3 Get started

Caution

•• Make sure that you have read the safety instructions in the 'Important safety instructions' section before you connect and install your handset.

Connect the base station

Warning

•• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the phone.

•• Use only the supplied power adapter to charge the batteries.

Note

•• If you subscribe to the digital subscriber line (DSL) high speed internet service through your telephone line, ensure you install a DSL filter between the telephone line cord and the power socket.The filter prevents noise and caller ID problems caused by the DSL interference. For more information on the DSL filters, contact your DSL service provider.

•• The type plate is located on the bottom of the base station.

1 Connect each end of the power adapter to:

• the DC input jack at the bottom of the base station;

• the power socket on the wall.

2 Connect each end of the line cord to:

•the telephone socket at the bottom of the base station;

•the telephone socket on the wall.

Install the handset

The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging.

Caution

•• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•• Use only the supplied batteries.

•• Risk of decreased battery life! Never mix different brands or types of batteries.

Note

•• Charge the batteries for 8 hours before first use.

•• If the handset becomes warm when the batteries are being charged, it is normal.

EN 7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Register your product and get support at Extended user documentationPage Contents Restore default settings BatteriesText and number input tables About operating and storage temperatures Power requirementsVoltages, as defined in the standard EN 60950 To avoid damage or malfunctionWhat is in the box Your phoneOverview of the phone REDIAL/C EarpieceDisplay icons Overview of the base stationInstall the handset Get startedConnect the base station Check the battery level Change the remote access PIN codeSet the date and time Charge the handsetCheck the signal strength What is standby mode?Make a call CallsAnswer a call End a callSwitch between two calls Adjust the earpiece/speaker volumeMute the microphone Make a second callPress to add a space Enter text and numbersPhonebook Edit a record Delete a recordDelete all records Call log Delete all call records View the redial records Redial listRedial a call Delete a redial recordPhone settings Sound settingsECO+ mode Set the display language Name the handsetTurn the answering machine on or off Set the answer modeSet the answering machine language AnnouncementsIncoming messages Restore the default announcementListen to the announcement Listen to the incoming messageRemote access Set the ring delayAccess the answering machine remotely Dial mode ServicesAuto conference Select the recall durationRestore default settings Register additional handsetsUnregister the handsets Dtmf Technical dataDeclaration of conformity Compliance with EMFDisposal of your old product and batteries Page Screen Read, what do I do?Handset does not ring Text and number input tables Appendix32 EN Index 34 EN Page 0168
Top Page Image Contents