Philips gb telephone manual Install your phone, Install battery, Charge battery, Getting started

Page 13

bracket.

2Turn the bracket upside down and then re-insert the bracket to the back of the base station.

3.3Install your phone

Before using the handset, the batteries have to be installed and fully charged.

3.3.1Install battery

!Warning

Always use AAA rechargeable batteries supplied with your unit. There could be risk of battery leakage if you use alkaline batteries or other battery types.

1Slide out the battery cover.

3Insert screws (not included) into the wall.

2Place the batteries in the correct polarity as indicated and replace the cover.

4Align the mounting holes on the

back of the base with the screws on the wall.

5Slide the base down into place.

3.3.2Charge battery

!Warning

The handset must be charged for at least 24 hours before using it for the first time. When the battery level becomes low, the low battery sensor alerts you by sounding an audible tone and blinking the battery icon. If the battery level becomes exceedingly low, the phone automatically switches off shortly after the alert and any function in progress will not be saved.

Getting started

11

Image 13

Contents CD150 SE150 Page Table of contents Technical data Frequently asked Questions31 Index Advanced settingsSafety Information Power requirementsConformity Using GAP standard complianceElectric, Magnetic Electromagnetic Fields EMF NiMH batteries Guarantee Bracket AAA rechargeable Power supplyYour phone Congratulations on your purchase and welcome to PhilipsBack/Clear key c Overview of your phone Earpiece OK keyNavigation keys Talk key rCall transfer/Intercom keyi MicrophoneMicrophone Key Display icons Status barBack key Overview of the base station Paging keyConnect the base station Getting startedInstall battery Install your phoneCharge battery Getting startedBlinks during charge Welcome modeTip Menu structure Using your phone Use more of your phone Access phonebook Using your phonebookStore a contact Phonebook Modify a phonebook entry6.1 Add/edit direct access memory Direct access memoryDelete direct access Memory Using the redial listAccess call log Using the call logSave a redial number into Phonebook Delete a redial numberConsulting the call list Using the intercomSave call list entry into the phonebook Delete a call list entryTransfer an external call to Another handset Intercom another handsetAnswer an external call During intercom Establish a three-party Conference callPress Vkey on the base station PagingAll the registered handsets start to ring Handset Tone Set the ring volume Personal settingsTo Personal SET and press Set the ring melodyChange the display language Personal settingsScroll to your desired language and press OK to confirm Activate/deactivate auto hang-upSet alarm Clock and AlarmSet date and time Set date/time formatScroll to OFF, on Once or on OK.DAILY and press Clock and AlarmOr Melody 3 and press OK to Confirm Change Master PIN Advanced settingsPIN entered will be shown as Asterisks * on the screen RegistrationUnregister Reset unitTo Advanced SET and press OK, scroll to Unregister Country selectionSet prefix Change the dial modeTo Advanced SET and press OK, scroll to Auto Prefix Change recall timeOK, scroll to First Ring and press OK Default settingsTechnical data Handset does not charge Connection Handset does not switch onIcon is not blinking during charge Communication is lost during a callHandset warms up when making a long call Cannot change the settings of my voice mailMy handset keeps going into idle mode Product behaviour Keypad does not workIndex Unmute 15 Unregister Volume