8.6Set prefix
This feature allows you to define a prefix number to be added to the beginning of a number during predialling (see “Predialling” on chapter 4.1.1). You may also use this feature to add a detect string to match and replace the first few digits of the number during predialling.
You can enter up to a maximum of 5 digits for the detect string and auto prefix number respectively.
1Press m key in idle mode, scroll
:to ADVANCED SET and press
<OK, scroll :to AUTO PREFIX
<OK.and press
2DETECT DIGIT is displayed on the screen. Press <OK to enter.
• The last stored detect string is
displayed (if any).
3Enter a detect string number (maximum 5 digits) and press <OK
to confirm.
4PREFIX is displayed on the screen. Press <OK to enter.
• The last stored prefix number is
displayed (if any).
5Enter the prefix number (maximum 10 digits) and press <OK to confirm.
•A validation tone is emitted and the screen returns to previous menu.
Note
If no detect string (blank) is entered, the prefix number will be automatically added to the predial number after rkey is pressed.
For numbers starting with *, # or P, the prefix number will not be added to the predial number after rkey is pressed.
28
8.7Change recall time
Recall time (or dial delay) is the time delay by which the line will be disconnected after you press rkey. It can be set to short, medium or long.
The default value of recall time that is preset in your handset should be the best suited for your country network and therefore you should not need to change it.
1 Press m key in idle mode, scroll :to ADVANCED SET and press <OK, scroll :to RECALL TIME and press <OK.
2 Scroll :to SHORT, MEDIUM or LONG and press <OK to confirm.
• A validation tone is emitted and the screen returns to previous menu.
8.8 Change the dial mode
The default value for dial mode that is preset in your handset should be the best suited for your country network and therefore you should not need to change it. There are two dial modes: Tone or Pulse.
1Press m key in idle mode, scroll
:to ADVANCED SET and press
<OK, scroll : to DIAL MODE and press <OK.
2Scroll :to TONE or PULSE and press <OK to confirm.
•A validation tone is emitted and the screen returns to previous menu.
8.9Set first ring
When this function is set to Off, the first ring from a voice call will not sound. This is particularly useful in countries where calling line identity is sent after the first ring.
1Press min idle mode, scroll : to ADVANCED SET and press
Advanced settings