Uniden FP098 manual Operation

Page 6

If any button is pressed before , the last number will not redial.

OPERATION

Redial

If you need to call the last number dialed, simply pick up the handset and

press . The telephone will automatically redial the last number dialed.

Flash - Call Waiting

If the Call Waiting tone sounds while you are on a call -

New Zealand: Press to switch between callers.

Australia: Press then to switch between callers.

Centrex - Transfer

If you subscribe to the Telecom Centrex service, flash may be used to transfer calls. Press flash followed by the extension number you wish to transfer to.

Adjusting Volume Controls

Ringer volume:

You can adjust the ringer volume by moving the ringer volume switch, located at the rear of the telephone base, to the desired HI or LO position.

Handset volume:

You can adjust the handset earpiece volume by moving the volume control located at the rear of the telephone base, to the desired level.

Placing a Call on Mute

To allow you to privately speak with another person while you have a caller

on the line, press . This will turn off the handset microphone, preventing any private conversation from being heard by the caller.

Press again to resume the telephone conversation with the calling party.

5

Image 6 Contents
FP098 Contents FeaturesSET UP Connecting Line CordsYour FP098 Package Location of Controls & Connections Handset Base UnitRear of Base Unit Installation Telephone.5mmHandset resting clip Operation Hang up the handset Speed Dial NumbersStoring One-Touch Speed Dial Numbers Dialing Speed Dial NumbersWarranty 2002 Uniden Australia Pty Limited Uniden New Zealand Limited