Uniden FP098 manual Installation, Telephone.5mm, Handset resting clip

Page 5

INSTALLATION

WALL MOUNTING

You can mount your phone directly on a wall. Before mounting your phone, consider the following:

Select a location away from electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

Make sure the wall material is capable of supporting the weight of the

Telephone.5mm

Use the screws (supplied) with anchoring devices suitable for the wall material where the telephone is placed.

85mm

1.Insert two mounting screws 85 mm apart. Allow about 5mm between the wall and screw heads for mounting the phone.

2.Gently remove and turn the Handset Retainer

Tab 180° and return.

3. Place the Base Unit on the screws and push down until it’s firmly seated.

Handset resting clip

For your convenience, there is a handy clip located on top of the base unit. This allows you to rest the handset there without disconnecting the call.

4

Image 5
Contents FP098 Features ContentsYour FP098 Package SET UPConnecting Line Cords Rear of Base Unit Location of Controls & ConnectionsHandset Base Unit Handset resting clip InstallationTelephone.5mm Operation Storing One-Touch Speed Dial Numbers Speed Dial NumbersHang up the handset Dialing Speed Dial Numbers2002 Uniden Australia Pty Limited Uniden New Zealand Limited Warranty