02Safety precautions

Installation precautions

Observe the following precautions when installing with any items such as the optional stand.

When using the optional stand, brackets, or equivalent items

Ask your dealer to perform the installation.

Be sure to use the supplied bolts.

For details, see the instruction manual that comes with the optional stand (or equivalent items).

When using other items

Consult your dealer.

The following six mounting holes can be used for the installation:

Rear view

Mounting holes

Mounting holes

Median

line

Median line

Side view

Mounting surface

Mounting bracket (or equivalent)

Plasma television

M8 screw

12 mm to 18 mm

10

Caution

Be sure to use four or more mounting holes symmetrical to the vertical and horizontal median lines.

Use M8 screws, which go 12 to 18 mm in depth from the mounting surface of the plasma television. See the side view above.

Be careful not to block the ventilation opening at the rear of the plasma television.

Be sure to install the plasma television on a flat surface because it contains glass.

The screw holes other than the above are to be used only for the specified products. Never use them for mounting non-specified products.

Note

It is strongly recommended to use the optional Pioneer mounting products.

Pioneer shall not be liable for any personal injury or product damage that results from the use of mounting items other than the optional Pioneer products.

En

Page 10
Image 10
Pioneer PDP-4270XA Safety precautions Installation precautions, When using other items, Rear view, Side view