Pioneer PDP-4270XA Setting up, Reducing video noise, Setting Child Lock, Description

08Setting up

11Select “Colour System“ (/).

12Select a colour system (/).

You can select from among "Auto", "PAL", "SECAM", and "4.43NTSC".

Search	42.75MHz
System	B/G
Colour System	Auto
Store	No

13Select “Store“ (/).

14Select “Yes“, “Yes (Listed)“, or “No“ (/).

System	B/G
Colour System	Auto
Store	Yes
Tuner NR	On
Child Lock	View

Item	Description
Yes	You can select the channel using P+ / P–.
Yes (Listed)	Select this option to register the channel as your favourite
	channel.
	You can select the channel using the Favourite Channel list
	and P+ / P–.
No	You cannot select the channel using P+ / P–.

15Press HOME MENU to exit the menu.

•Alternatively, to set up for another channel, repeat steps 6 to 14.

Note

•The above procedure transfers and sets the selected channel information to the connected recording equipment such as a VCR or DVD/HDD recorder (DVR).

•Manual Adjust also allows you to make selections for Tuner NR, Child Lock, and Decoder. See Reducing video noise, Setting Child Lock, and Selecting a decoder input terminal.

Reducing video noise

For the individual channels, you can specify whether the plasma television should reduce video noise depending on the levels of broadcasting signals.

1Repeat steps 1 to 6 provided for “Setting up analogue TV channels manually“.

After selecting a channel (using Programme Entry), perform the following steps:

2Select “Tuner NR“ (/).

3Select “On“ or “Off“ (/).

Colour System	Auto
Store	Yes
Tuner NR	On
Child Lock	View
Decoder	Off

4 Press HOME MENU to exit the menu.

Note

•This function may not achieve a satisfactory result, depending on the conditions of broadcasting signals.

•When using a decoder with a decoder terminal selected, this function may fail to achieve a good result.

Setting Child Lock

Child Lock inhibits selected TV channels from being tuned and watched.

1Repeat steps 1 to 6 provided for “Setting up analogue TV channels manually“.

After selecting a channel (using Programme Entry), perform the following steps:

2Select “Child Lock“ (/).

3Select “Block“ (/).

Tuner NR	On
Child Lock	Block
Decoder	Off

•The selection is switched between "View" and "Block".

4 Press HOME MENU to exit the menu.

26

En