Pioneer PDP-4270XA Using the Hdmi Input, Connecting Hdmi equipment, Activating the Hdmi terminal

10Using with other equipment

Note

•For details, refer to the operation manual for the audio equipment to be connected.

•Audio signals synchronizing with currently displayed images are always output to the AUDIO OUTPUT terminals.

Connecting HDMI equipment

Rear view

Using the HDMI Input

The INPUT 3 terminals include an HDMI terminal to which digital video and audio signals can be input. To use the HDMI terminal, activate the terminal and specify the types of video and audio signals to be received from the connected equipment. For the types of these signals, see the operation manual that came with the connected equipment.

Before starting the menu, press INPUT 3 on the remote control unit or press INPUT on the plasma television to select INPUT 3.

Input signal table

1920 x 1080i@50 Hz

720 x 576p@50 Hz

1280 x 720p@50 Hz

720(1440) x 576i@50 Hz

1920 x 1080i@59.94 Hz/60 Hz

720 x 480p@59.94 Hz/60 Hz

1280 x 720p@59.94 Hz/60 Hz

720(1440) x 480i@59.94 Hz/60 Hz

1920 x 1080p@24 Hz

For audio, the system supports the following:

•Linear PCM (STEREO 2ch)

•Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

Note

•PC signals are not compatible with the HDMI terminal.

•It may take a short while until the image is displayed, depending on the equipment connected.

40

3

HDMI cable carrying the HDMI mark

SCART cable

(for analogue audio)

HDMI device

Activating the HDMI terminal

1Press HOME MENU.

2Select “Option“ (/ then ENTER).

3Select “HDMI Input“ (/ then ENTER).

4Select “Setting“ (/ then ENTER).

5Select “Enable“ (/ then ENTER).

Item Description

Disable (default) Deactivates the HDMI terminal.

Enable Activates the HDMI terminal.

6 Press HOME MENU to exit the menu.

To specify the type of digital video signals:

1Repeat steps 1 to 3 provided for “Activating the HDMI terminal“.

2Select “Video“ (/ then ENTER).

En