Pioneer PDP-4270XA operating instructions Changing the password, Resetting the password function

Useful adjustment settings 09

Note

•If you fail to enter the correct password three times, "Invalid password." appears, and the menu is closed. In order to display the password entry screen again to unlock the password, select the blocked channel or open the menu again.

•If the password entry screen disappears before entry, you may recall it by pressing ENTER.

Changing the password

Use the following procedure to change the password.

1Press HOME MENU.

2Select “Setup“ (/ then ENTER).

3Select “Password“ (/ then ENTER).

The password entry screen appears. Enter the current 4-digit password using buttons 0 to 9.

4Select “Change Password“ (/ then ENTER).

5Enter a 4-digit password to be newly set, using buttons

0to 9.

Change Password

Please Input New Password.

Reconfirm New Password.

6Enter the same password that you have entered in step 5.

•If a different password is entered, the operation goes back to step 5 for reentry from the beginning.

•You can try up to three times to reconfirm the new password before the Change Password screen is automatically exited.

7Press HOME MENU to exit the menu.

Note

• Take a note of the newly set password and keep it handy.

Resetting the password function

1Press HOME MENU.

2Select “Setup“ (/ then ENTER).

3Select “Password“ (/ then ENTER).

The password entry screen appears. Enter your 4-digit password using buttons 0 to 9.

4Select “Reset“ (/ then ENTER).

5Select “Yes“ (/ then ENTER).

6Press HOME MENU to exit the menu.

Note

•The above procedure will reset the password to the factory default (1 2 3 4).

Disabling the password function

Use the following procedure if you want to deactivate the protection function that prompts password entry.

1Press HOME MENU.

2Select “Setup“ (/ then ENTER).

3Select “Password“ (/ then ENTER).

The password entry screen appears. Enter your 4-digit password using buttons 0 to 9.

4Select “Password Setting“ (/ then ENTER).

5Select “Disable“ (/ then ENTER).

6Press HOME MENU to exit the menu.

Note

•The above procedure will reset the password to the factory default (1 2 3 4).

•After disabling the password function, you cannot change the Child Lock settings. For the Child Lock, see page 26.

•After disabling the password function, you cannot change or reset the password.

•When you enable the password function again after disabling it, the factory default password (1 2 3 4) is restored.

English

We suggest you write down your password so you don't forget it.

PDP-4270XA

Your password No.:

If you forget the password

When the message "Please Input Your Password." is displayed, press the ENTER button on the remote control unit and hold it down

for 3 seconds or longer.

The password reverts to "1234".

37

En