Installing Your Expansion Handset
Follow these three easy steps to get your new handset ready to use:
1 Install the battery pack.
2 Connect the charger and charge your new handset for 15 - 20 hours. 3 Register your new handset to the main base.
Step 1: Install the Battery Pack
1 Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.
2
3
Place the battery pack in the battery compartment with the connectors on the battery and on the compartment aligned.
Place the battery case cover back on the handset and slide it upwards until it clicks into place.
•Use only the Uniden battery (BT- 0003) supplied with your phone. Replacement batteries are available. Please see our website at www.uniden.com.au or www.uniden.co.nz Recharge your handset on a regular basis by returning the handset to
the charger after each phone call.•
Rechargeable
Must Be Recycled or Disposed of Properly
(2)