Uniden Elite 8805 owner manual Register the Handset, Connect the Charger

Disconnect the AC adapter from the main base.

While pressing down on the following key, reconnect the AC adaptor. DSS7815/DSS7815+1 models - find handset key DSS7855/DSS7855+1 models - flash/find hs key

Keep pressing the key until the CHARGE LED starts to blink. On the handset, press and hold the # key until you hear a beep.

(3)

Step 2: Connect the Charger

1 Connect the AC adapter to the DC IN 9V jack and to a standard 240V AC wall outlet.

2

3

4

Set the charger on a desk or tabletop, and place the handset in the charger with the LCD screen facing forward.

Make sure the charge LED illuminates. If the LED does not

illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the charger charging contacts.

•Use only the supplied AAD-600S AC adapter. Do not use any other AC adapter.

•Place the charger close to the AC outlet so that you can unplug the AC adapter easily.

Charge the handset for 15 - 20 hours before using.

Step 3: Register the Handset

YOU NEED TO REGISTER THE ELITE8805 SERIES TO THE MAIN BASE BEFORE USE!

For Backward Compatible Base Models - DSS7800 series [DSS7815, DSS7815+1, DSS7855 and DSS7855+1]

1

2

3