NOTE
If you have selected a speed dial button that does not have a stored number, the telephone will not dial and the screen will display
[EMPTY.]
8
Dialling Speed Dial Numbers
There are two different ways to dial a stored
1.a. Pick up the handset and press the dial button.
b.Press the desired memory location button, either 0 to 9 or or # .
2.a. Don’t pick up the handset - press the dial button.
b.Press the desired memory location button, either 0 to 9 or or # , then check that the screen display shows the correct information.
c.Pick up handset, then press the callback button.
Chain Dialling
On certain occasions (such as telephone banking), after dialing one number, you may wish to dial another number without hanging up. This is known as chain dialing or cascade dialing.
Simply store the second number in another memory location. During your call, press the dial button followed by memory location number to dial the 2nd memory. In this way you can recall both numbers that are stored into their own memory locations at the relevant times.
Call Timer
Approximately 10 seconds after the handset is picked up, the call counter will begin and show the elapsed time on the display screen.
Deleting a Speed Dial Memory
1.Press the dial button and press the desired memory location number either 0 to 9 or or # - the screen displays the speed dial contents.
2.Press the delete button - the screen displays[DELETE]and the memory location number.
3.Press the delete button again.