Troubleshooting
PROBLEMS | CAUSES | SOLUTIONS | |
|
|
| |
- No dialling tone when | - The base station is not properly | - Check the connections.(p 4). | |
pressing | . | connected to electricity or to the | Reset the product by unplugging the |
telephone sockets. | power cord for few seconds and then | ||
|
|
| by connecting it again |
|
| - Too far from the base station | - Move closer to the base |
|
| - Battery pack is low (low battery icon is | - Charge battery pack for at least 24 |
|
| displayed). | hours. (page 4). |
|
|
|
|
- | icon is blinking. | - The handset is out of range. | - Move closer to the base station. |
|
| ||
|
|
| |
- When the handset is | - The handset is not placed correctly on | - Take the handset off the base station | |
placed on the charging | the base station charging unit. | and put it back again. | |
unit, no beep is heard. | - Charging contacts are dirty. | - Clean them with a clean and dry cloth. | |
|
|
| |
- Battery icon remains | - Handset battery pack is defective. | Please contact your PHILIPS dealer in | |
empty although the |
| order to purchase new rechargeable | |
handset has charged for 24 |
| battery pack. | |
hours. |
|
|
|
|
|
| |
- No symbol on the | - Battery pack is uncharged. | Make sure your product is plugged in. | |
display. |
|
| (p 4). |
|
|
| Charge battery pack. (p 4). |
|
|
| |
- Bad audio quality | - Interference from nearby electrical | - Try to plug the base station in | |
(crackles, muted, echo, | appliance. | elsewhere. | |
etc.). |
| - Base station installed in a room with | - Install the base station in a different |
|
| thick walls. | room. |
|
| - You are using the handset too far from | - Move closer to the base station. |
|
| the base station. | - Reduce the volume level (p 8) |
|
|
| |
- The Caller Line | - Service not activated or wrong | - Check your subscription with network | |
Identification does not | operator or wrong setting. | or change caller identification type (see | |
work. |
|
| p 9). |
|
|
| Philips cannot guarantee the operation |
|
|
| behind an ISDN adpater or a PABX. |
|
|
| |
- The telephone rings | - An attempt to transfer a call is in | - Press the line key to take the line if | |
while on line. | progress. | appropriate. | |
|
|
|
|
Note 1 : For more information on this function, contact your operator. Available also subject to technical availability.
Note 2 : If Caller Display type does not work, try another type (1, 2,3...).
Note 3 : Philips has designed the Xalio 300 to work on a PSTN (analogue) line. Use on an ISDN line with an adapter is not guaranteed.
Note 4 : The screen can display | if non recognised number, |
|
an unidentified call (unlisted numbers, withheld caller identification). | 11 | |
|
| |