Philips Xalio 300 manual Installing your Xalio

Page 6

Installing your Xalio 300

Plug the power supply unit into the wall socket.

Plug the telephone line cord into the wall socket.

3Open the battery door

on the handset by sliding it down.

4Connect the battery

pack to the connector inside the handset. Place the battery with sticker face up and wires along the left side of the battery pack.

When replacing the battery,

only use NiMH. Optimal battery life is reached after 3 cycles of full charge / discharge.

Standby time : around 300 hours

Talk time : around 18 hours

5Replace the battery door.

Put the handset on the

base and charge for 24 hours before use.

Image 6

Contents Page Page Handset display New entry on call log Call log consultationContents Installing the Xalio Configuring your XalioUnpacking your Xalio Installing your Xalio Using the Xalio Display shows the corresponding number To store an entry in the phonebooksEnter the memory number Press the Line key to call To view the phonebooks entriesPress the Line key To call back the last five callers To delete an entryDisplay shows the last number called Press the Redial key twiceProgramming the Xalio You can choose from 3 ringer volumesYou can choose from 3 earpiece volume levels You can choose from 7 ringer melodiesTo select Caller Display Type country dependent Press the Programming key Press the 5 key Select 1 orPress the Programming key Press the 4 key Troubleshooting Problems Causes SolutionsEnvironment and Safety