Garmin GMA 350 manual Control Example Phrase Action, Enabled

GMA 350 Audio Panel

If a command is incorrectly interpreted by the GMA 350, a negative acknowledgement tone will be played. The pilot should repeat the command by using the Push-to-Command button, or by manually using the front panel controls of the GMA 350. In the evenet of any abnormal Voice Recoginition operation, the front panel controls may be used to override Voice Recognition and manually control the GMA 350.

The following table lists the available Voice Recognition commands, the associated actions, and the voice response if applicable:

Control	Example Phrase	Action
	“COM one”	Toggles COM1 audio
	“MIC one”	Selects MIC1/COM1 audio
	“COM one MIC”	Selects MIC1/COM1 audio
	“COM two”	Toggles COM2 audio
	“MIC two”	Selects MIC2/COM2 audio
	“COM two MIC”	Selects MIC2/COM2 audio
	“Split COM”	Selects split COM mode
COM		Mutes monitored COM on
		primary COM reception (refer to
	“Monitored COM mute” OR
		Page 8).
	“Mute Monitored COM”
		Voice Response: “Monitor mute
		enabled”.
	“Disable monitored COM mute”	Disables monitored COM mute
	“Monitored COM mute disable”	on primary COM reception (refer
	“Disable mute monitored COM”	to Page 8).
	OR	Voice Response: “Monitored
	“Mute monitored COM disable”	mute disabled”.
NAV	“NAV one”	Toggles NAV1 audio
	“NAV two”	Toggles NAV2 audio
AUX	“AUX” OR “Auxiliary”	Toggles AUX audio

190-01134-12 Rev. D Garmin GMA 350 Pilot’s Guide 25