Franklin STK-2032 manual Resetting Bookman Optional Features

Page 9

Resetting BOOKMAN

 

Optional Features

 

 

 

If the BOOKMAN keyboard fails to re- spond, or if its screen performs errati- cally, first press CLEAR and then press ON/OFF twice. If nothing happens, follow the steps below to reset it.

Warning: Pressing the reset button with more than very light pressure may permanently disable your BOOKMAN. In addition, resetting BOOKMAN erases settings and information entered into its built-in book, and in an installed cartridge.

1.Hold CLEAR and press ON/OFF . If nothing happens, try Step 2.

2.Use a paper clip to gently press BOOKMAN’s reset button.

If your BOOKMAN has one car- tridge slot, look for the recessed pin- sized hole on the battery cover or near the cartridge slot.

If your BOOKMAN has two cartridge slots, the reset button is located on the front of the unit next

to ON/OFF .

AC adaptor jack

Headphone jack

AC adaptor jack: Your BOOKMAN may be equipped with a standard 3.5 mm jack for use with a 9-volt,200-300 milliamp AC/DC adaptor.

This symbol indicates that the inner core of the plug of an AC adaptor is negative and that the outer part of the plug is posi- tive. If your AC/DC adaptor does not have this symbol, confirm its compatibil- ity at its place of purchase.

Headphone jack: Your BOOKMAN may also have a 3.5 mm stereo head- phone jack for use with a standard im- pedance 8 Ohm headset.

7

Image 9
Contents Stock Symbols License Agreement Limited USE LicenseContents Key Guide Turn Bookman on Press Card Installing Cartridges Selecting BooksChanging Settings Viewing a Demonstration Press Enter to select the setting Press Clear when doneFollow the Arrows Searching by Ticker Symbol Press Enter Press or to readMoving between Menu Items Cartridge Care Searching by the Stock NamePress Clear Highlight the Name menu Viewing Full Menu ItemsResetting Bookman Optional Features Limited Warranty US only Copyrights & PatentsModel STK-2032 Amex IndexElectronic Publishers