Transfer items using infrared
Using infrared (IR), you can send and receive information, such as contacts and appointments, between two devices.
Sending information
To send information:
1.Switch to the program where you created the item that you want to send, and locate that item in the list.
2.Align the IR ports so that they are unobstructed and within a close range.
3.Tap and hold the item, then tap Beam Item on the
NOTE You can also send items, but not folders, from File Explorer. Tap and hold the item that you want to send, then tap Beam File on the
Receiving information
To receive information:
1.Align the IR ports so that they are unobstructed and within a close range.
2.Have the owner of the other device send the information to you. Your device will automatically receive it.
Connect to the Internet
You can connect to your ISP, and use the connection to send and receive
You can connect to the Internet in one of these ways:
•Create a modem connection. If this is the method that you want to use, see “To create a modem connection to an ISP.”
•Use an Ethernet card and a net tap to connect to a network. If this is the method that you want to use, see “To create an Ethernet connection to an ISP.”
Get connected |