Mobile PDA Cradle, Introduction | Carcomm CMPC-32 instruction

Mobile PDA Cradle

CMPC-32 HTC Typhoon / i-Mate Sp3 / Qtek 8010

Introduction

This installation manual has been prepared to provide the basic information needed to install the CMPC-32. This manual is not intended to be definitive, because there are different models and types of vehicles which will require different installation work. The information given is for general guidance only.

The terms of warranty demand that this mobile PDA cradle is installed by an experienced installer. An end-user should never attempt to install this mobile PDA cradle without professional assistance as the installation requires special tools and knowledge.

Note: Thoroughly read the manual before beginning the installation procedure.

WARNINGS

1.Ensure that the vehicle’s battery is disconnected before you start the installation procedure and that it remains disconnected during the procedure.

2.Do not smoke or use open flames when working near the vehicle’s fuel system.

3.Ensure that the vehicle’s electrical cables, hydraulic lines, fuel lines and safety equipment are not damaged during the installation.

4.Ensure that normal control and operation of the vehicle is not obstructed by the installation,particularly the brakes and steering. Ensure that airbag operation is not obstructed.

5.Electronic and other sophisticated systems (for example speed control, ABS anti-lock brake,fuel injection-, navigation- and airbag systems) are relatively immune to malfunction caused by PDA or GPS receiver. However, should you experience false operation of these systems or are in any doubt whatsoever as to their functionality, please consult the vehicle’s dealer.

6.The mobile PDA cradle is suitable for use only in vehicles with a 12V negative grounding. Use on other supply voltages or alternative polarity will damage the equipment.

7.The PDA should not be left switched on for extended periods without running the vehicle’s engine. Failure to comply could drain the vehicle’s battery.

Before starting the installation of the mobile PDA cradle please check if the following contents are present :

-Mobile PDA Cradle

-Rotating Swivel

-Window Mount

-Suction Cup

-Fuse Holder cable with fuse

-Screw sets

-Surface cleaner

-Manual

Compatible devices

HTC Typhoon

i-mate SP3

Qtek 8010

Orange SPV C500

DoPod 565

Audiovox SMT5600

Krome Intellekt iQ700

Safety-Mount® pattern

www.carcomm.nl 1

CMPC-32 specifications

The Carcomm CMPC-32 is a cutting-edge mobile phone cradle designed specifically for maximum functionality and convenience. Compatible with a wide range of devices, the CMPC-32 stands out due to its innovative features and user-oriented design. Built to accommodate various smartphones, this cradle ensures that users can enjoy seamless connectivity while on the road.

One of the key features of the Carcomm CMPC-32 is its robust mounting system. This system allows for easy installation in various vehicle types, ensuring that users can have their devices securely attached regardless of their vehicle's configuration. The cradle’s adjustable design allows for optimal positioning, making it easier for drivers to access their smartphones for navigation, calls, and music playback.

In terms of technology, the CMPC-32 integrates advanced charging capabilities. It supports both wired and wireless charging, enabling users to keep their devices powered without the hassle of tangled cords. This feature is particularly beneficial for long journeys, where having a fully charged device is crucial for communication and navigation purposes.

The CMPC-32 also boasts an array of connectivity options. With its built-in Bluetooth capability, users can connect their smartphones with ease, allowing for hands-free calls and seamless audio streaming. This ensures not only convenience but also enhances safety by minimizing distractions while driving. The cradle is designed to work with various hands-free technologies, ensuring a broad compatibility with different devices and systems.

Another important characteristic of the Carcomm CMPC-32 is its durable construction. Designed to withstand the rigors of everyday use, the cradle is made from high-quality materials that can resist wear and tear. Its ergonomic design ensures that devices are held securely in place, reducing the risk of damage during travel.

In conclusion, the Carcomm CMPC-32 is an exemplary mobile phone cradle combining versatility, safety, and advanced technology. With features like adjustable mounting, robust connectivity options, and durable construction, it offers an ideal solution for users seeking to enhance their driving experience while keeping their devices accessible and charged. Whether for daily commutes or long road trips, the CMPC-32 stands as a reliable companion for any smartphone user.