Installing the Mobile PDA Cradle, Step | Carcomm CMPC-32 specification

Mobile PDA Cradle

CMPC-32 HTC Typhoon / i-Mate Sp3 / Qtek 8010

Installing the Mobile PDA Cradle

1.Mount the window suction mount or Safety-Mount® (sold seperataly, instructions included with the product ) To mount the window mount please clean the window and place the window mount in your preferred position. Tighten the nut on the base of the mount to make it stick to the window. Place the window mount in a position where it doesn’t interfere with the operation of the vehicle.

2.You can screw the cradle to your mounting part directly, or use the included swivel. If you use a Safety-Mount® it may be necessary to drill holes in the Safety-Mount®

to be able to screw on the cradle with or without swivel. You can use the pattern on the front page to see the positions where to drill the holes in the Safety-Mount®.

Adjust the swivel to optimize your view on the PDA screen and tighten it well.

3.Align the cradle on the rotating swivel or Safety-Mount® and screw the cradle onto it with the enclosed screws through the 4 holes. Tighten the screws well.

For permanent installation and connection to the cars ignition power move on to step 5.

4.Plug the Cigarette jack into the Cigarette plug adaptor, check if the red light of the cigarette plug is lighted. Now you are able to charge your PDA in the mobile cradle. Move on to step 7.

5.Disassemble the Cigarette plug or cut it from the wiring loom and strip the wires. (The cradle is also available with a fuse in the wiring loom instead of cigarette plug.)

6.Now the red wire (with fuse) needs to be connected to the red wire from the cradle wiring loom. Then the other side of the fuse’s wire needs to be connected to the vehicle’s 12V Ignition controlled voltage (+15) to avoid draining the vehicle’s battery when the vehicle is not used for a long time.

The black wire needs to be connected to the Negative Ground of the vehicle.

7.Slide the PDA into the cradle slowly and make sure the PDA is centred well above the connector. Then press it over the connector gently.

When removing the PDA from the cradle use one hand to hold the cradle and other hand to pull the PDA out of it.

Connecting a Carcomm Euro-Navigator GPS Receiver. (optional)

The phones supported by this cradle only support Bluetooth GPS Receivers. When installing a Bluetooth GPS Receiver please follow the instructions supplied with the product, phone and software to set it up.

Connecting the Carcomm CIGM-918 Quad-Band Inside-Glass Antenna. (optional)

Connect the FME Female plug from the CIGM-918 to the FME Female connector of the Smartphone cradle. The Antenna should be mounted onto the vehicle’s windscreen with the VHB tape inside the vehicle.

Step 1

Step 2

Step 3

Step 4

Step 7

www.carcomm.nl 2

CMPC-32 specifications

The Carcomm CMPC-32 is a cutting-edge mobile phone cradle designed specifically for maximum functionality and convenience. Compatible with a wide range of devices, the CMPC-32 stands out due to its innovative features and user-oriented design. Built to accommodate various smartphones, this cradle ensures that users can enjoy seamless connectivity while on the road.

One of the key features of the Carcomm CMPC-32 is its robust mounting system. This system allows for easy installation in various vehicle types, ensuring that users can have their devices securely attached regardless of their vehicle's configuration. The cradle’s adjustable design allows for optimal positioning, making it easier for drivers to access their smartphones for navigation, calls, and music playback.

In terms of technology, the CMPC-32 integrates advanced charging capabilities. It supports both wired and wireless charging, enabling users to keep their devices powered without the hassle of tangled cords. This feature is particularly beneficial for long journeys, where having a fully charged device is crucial for communication and navigation purposes.

The CMPC-32 also boasts an array of connectivity options. With its built-in Bluetooth capability, users can connect their smartphones with ease, allowing for hands-free calls and seamless audio streaming. This ensures not only convenience but also enhances safety by minimizing distractions while driving. The cradle is designed to work with various hands-free technologies, ensuring a broad compatibility with different devices and systems.

Another important characteristic of the Carcomm CMPC-32 is its durable construction. Designed to withstand the rigors of everyday use, the cradle is made from high-quality materials that can resist wear and tear. Its ergonomic design ensures that devices are held securely in place, reducing the risk of damage during travel.

In conclusion, the Carcomm CMPC-32 is an exemplary mobile phone cradle combining versatility, safety, and advanced technology. With features like adjustable mounting, robust connectivity options, and durable construction, it offers an ideal solution for users seeking to enhance their driving experience while keeping their devices accessible and charged. Whether for daily commutes or long road trips, the CMPC-32 stands as a reliable companion for any smartphone user.