Acer n300 manual Using an USB thumb drive, Removing an SD/MMC card

Page 32

3 Using expansion features Using an USB thumb drive

3Push the card into the slot using your finger until you feel the card lock and hear an audible system sound. This indicates that the card is properly seated within the slot.

Removing an SD/MMC card

1Hold your handheld securely.

2Release the card from the slot by using your thumb to push against the top of the card, as if you were pushing it further into the slot (a). An audible system sound and a click will signal that the card has been released.

3 Gently remove the card from the slot (b).

Using an USB thumb drive

Your Acer n300 supports USB host expansion. Via cradle or sync cable, you can access a USB thumb drive directly from your n300.

Inserting an USB thumb drive - Through the Cradle

1Connect the AC adapter cord to the DC-in jack at the back of the cradle.

2Plug the AC adapter into any AC current outlet.

3Insert the USB thumb drive into USB host port of Cradle.

Inserting an USB thumb drive - Through the 3-in-1 Sync cable (optional accessory)

1Plug the sync cable into the 26-pin I/O connector on the bottom of your handheld.

2Plug the AC adapter into any AC current outlet.

3Insert the USB thumb drive into USB host port of sync cable.

22

Image 32

Contents Acer n300 Handheld User’s GuideCopyright Disposal instructions About this User’s Guide Your guides First things firstPackage contents Maintaining your Acer n300Performing a hard reset Resetting your Acer n300Performing a soft reset Maintaining your Acer n300 Contents Appendix a Regulation & safety notices Features summary System requirementsPerformance DisplayProprietary 26-pin I/O connector BatteryAudio ConnectivityGetting started Acer n300 tour Acer n300 tourFront view Using the backlight Left viewTop view Bottom view Preparing to use your Acer n300 Rear viewCharging your Acer n300 Getting started Preparing to use your Acer n300Preparing to use your Acer n300 To charge your Acer n300Power LED status during charging Setting up your Acer n300 To set up your Acer n300To install the Microsoft ActiveSync software Installing the Microsoft ActiveSync softwareConnecting the computer To connect the computer Via the USB Sync cablePerforming the first synchronization process To perform the first synchronization processBy clicking on its icon from Programs Command interface Getting started Command interfaceHandheld buttons and the stylus Start menuGetting started Command interface Backup and restore data To launch Backup/RestoreBackup function Restore functionTo perform data backup To perform data restorationTo delete a file from a storage device Tap Delete to remove the file Inserting an SD/MMC card Using an SD/MMC cardUsing expansion features Using an SD/MMC card Using an USB thumb drive Using expansion features Using an USB thumb driveRemoving an SD/MMC card Inserting an USB thumb drive Through the CradleAppendix a FCC noticeDeclaration of Conformity for EU countries Operation conditionsRemarque à l’intention des utilisateurs canadiens Important safety instructions European Union EU LCD pixel statementRadio device regulatory notice General Exposure of humans to RF fields RSS-102 FCC RF safety requirementList of applicable countries Page Index