Installing the Battery
1 Open the battery compartment by pushing the latch in the direction of the arrow and lifting up (A). Turn the Backup Battery Switch on (B).
Backup Battery
Switch
A 
B
Compartment contacts |
Plastic battery tab |
Battery hook |
The battery compartment is displayed:
2 Position the battery pack, making sure the battery contacts are aligned with the contacts in the com- partment and the battery is placed on top of the plastic tab, as shown in the following illustration.
3 Slide the battery pack into the battery bay while simultaneously pulling the plastic tab and battery hook until the battery clicks into place.
Plastic tab
Battery hook
4 Replace the battery compartment cover.
English
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.