Charging the Battery
Turn the backup battery switch on before charging the battery. Data you entered may not be properly stored until the
1 Press and hold the connector button on the USB charging cable and connect it to the PA600 (1).
2 Plug the AC adapter cable into the power jack on the USB charging cable (2). 3 Connect the AC adapter into an electrical outlet (3).
2 3
1
Using the SD/MMC memory card
1 Remove the four screws from SD compartment cover and remove the cover.
2
Insert the SD card with the notched corner as shown by the icon on the case.
English
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.