TravRoute Pocket PC 5 manual Tap Going To, Add Stop, Tap Address, Step, Next

Page 6

If you choose to activate a region other than the region pre-installed on your QuickStart storage card, you will be required to download the selected region to your storage card using the Data Download Wizard from within the CoPilot desktop application. Additionally, you will not be able to use the data region that was pre-installed on your card.

7.In-vehicle hardware setup

WARNING: Never leave the GPS receiver in a closed vehicle that exceeds 60o C.

(For complete instructions, see the GPS Receiver Guide that came with the product, or tap Tutorial in the Welcome screen on your Pocket PC.)

First turn on your Pocket PC, then make sure that the GPS receiver is attached and powered and your engine is running before using CoPilot.

If you have a CoPilot vent mount and in-vehicle power adapter:

1.With your engine running, attach the cable to the Pocket PC and insert it into your vehicle’s cigarette lighter socket. Make sure it is firmly seated (red light on).

2.Attach the vent mount clips to the vent in your vehicle, in a position that will allow you to be comfortable as you view and operate CoPilot.

3.Slide the Pocket PC into the vent mount, and make sure it is turned on.

GPS Receiver setup:

Open CoPilot and tap the GPS button in the Welcome screen to set up your GPS receiver. CoPilot will scan all COM Port and Baud Rate settings until it finds your GPS receiver.

8.Adjust the speech volume

To hear CoPilot’s voice prompts, the volume on your Pocket PC must be turned all the way up. In the Pocket PC Start menu, go to Settings and tap on Sounds and Notifications. Under System Volume, move the slide bar all the way to the right. Or use your Pocket PC’s keypad when CoPilot is open: tap up until you reach the maximum volume.

If you installed the TTS (text to speech) voice option, you may also want to turn on the “Amplify Speech Volume” option — tap the Tools menu (if the menu isn’t visible, tap at the top or bottom of the screen), select Options, and tap the Guidance tab.

9.Enter an address

NOTE: There is no need to enter a starting point. CoPilot uses GPS positioning to determine your location automatically.

1. In the Welcome screen,

 

 

 

 

 

 

 

 

 

 

 

 

tap Going To.

 

 

 

 

 

 

2. In the Going To screen, tap

 

 

 

 

 

 

Add Stop.

 

 

 

 

 

 

3. In the Select Stop screen,

 

 

 

 

 

 

tap Address.

 

 

 

 

 

 

4. Using the keyboard, enter

 

 

 

 

 

 

 

 

Step 1

 

 

Step 2

a postal code and tap

 

 

 

 

 

 

 

 

Next, or type the name of

 

 

 

 

 

 

 

 

 

 

a country — as you type,

 

 

 

 

 

the scroll list will move to

 

 

 

 

 

that country. Tap it on the

 

 

 

 

 

list, then tap Next.

 

 

 

 

 

NOTE: For the United

 

 

 

 

 

Kingdom, postal codes

 

 

 

 

 

are entered in the City

 

 

 

 

 

screen (Step 5). The

 

 

 

 

 

country entry screen

 

 

 

 

 

 

Step 3

 

 

Step 4

won’t appear if map data

 

 

 

for only one country is

 

 

 

 

 

 

 

 

 

 

downloaded.

 

 

 

 

 

5. Type a city name or pick

 

 

 

 

 

one from the list and tap

 

 

 

 

 

Next.

 

 

 

 

 

6. Enter a house number

 

 

 

 

 

if you like (it’s optional),

 

 

 

 

 

then enter a street name.

 

 

 

 

 

 

Step 5

 

 

Step 6

As you type,

 

 

 

database matches will

 

 

 

 

 

appear below. If no exact

 

 

 

 

 

match is found, highlight

 

 

 

 

 

one of the

 

 

 

 

 

possible matches and

 

 

 

 

 

tap Next.

 

 

 

 

 

- vii -

- viii -

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Page Contents CoPilot Help Files on your Pocket PC Download map data Download the Data Give your data region a name and click NextTap Address Tap Going ToAdd Stop StepCross Street, or one Driver Safety ScreenCancel Detour Several Streets in NearbyHints and Trouble-shooting XiiSafety Warning CoPilot OverviewWhat’s New in Version 5.0? Getting Started Hardware In-vehicle Hardware SetupIf you have a vent mount and in-vehicle power adapter Getting Started Get ConnectedUninstalling a Previous Version Installing CoPilotFor NavMan GPS Jacket Users Changing the Voice Option at Any Time Adding a Data RegionRegion Selection CoPilot offers the following voice optionsDeactivation and Licence Update Speech VolumeSoftware Activation CoPilot QuickStart Specify Where Data Will Be StoredData Download to Your Pocket PC Storage Card Application DownloadData Download Choose a Data Selection MethodClick the City Radius icon City RadiusSelect Your Data Name the selection, then click NextMap Area Click the Map Area iconTrip POI Download Options Trip TransferDownload the Data Importing Custom Places Steps for ImportingEditing Custom Places in the Database First time you use CoPilot , you Using Your Pocket PC for GuidanceAddress Entry  Enter a Latitude/Longitude pointStart Driving To begin your trip, simplyTo return to the Going To screen to edit your trip at any Entering a Home Address Favourites Entering a Work AddressTo Save Your Current Location As a Favourite Finding Points of Interest Map Preview of a POIIntersection Contact IntegrationClosing CoPilot Saved TripLatitude/Longitude Tap Latitude LongitudeItinerary Screen Driver Safety/Map/Itinerary ScreensDriver Safety Screen Map ScreenNavigating Through CoPilot Screens Customizing the Guidance ScreensMap Modes Picking Stops From the Map Trip Editing and WaypointsGetting ETA’s and Distances Optimizing StopsSelective Routing Detour FeatureTailoring Your Route Using Waypoints Avoiding a Road in the Trip ItineraryGuidance Tools Menu OptionsRouting MapModes Menu Open and Play GPS Tracks Receiving signals-ON Receiving signals-OFFGPS Menu Save Current LocationOptions Tap FinishGuidance Mode on Your Pocket PC Welcome ScreenGoing To Screen Select Stop Screen No GPS SignalDriver Safety Screen Determining Current PositionItinerary Screen Map ScreenToolbar Buttons Next turn directional arrowTrip Planning on Your Pocket PC Saving and Loading Trip ItinerariesPrograms CoPilot . New Trip Trip Planning on Your DesktopRun Trip Edit TripPrint Save TripOpen Trip HelpMore Detail ZoomZoom Out Less DetailPick Stops Zoom To RegionRefresh Map Options Tools MenuMap Window Landmark ReportingHelp Menu Trip Planner Window Cities & AddressesTrip Planner Window Contacts Trip Planner Window Points of InterestTrip Planner Window Favourites Driving Directions and Map Split ScreenRouting Options Trip SummaryFuel Cost Calculator Live Mode Overview CoPilot Live CommunicationsCoPilot Live Web Vehicle Location Live Mode Automatic Vehicle Location AVLLive Mode Send/Receive Messages Long as both you and the driver are running CoPilot LiveLive Mode Send Trip Itinerary Updates Driving with Live Pocket PC SetupPocket PC Setup for Live Web Tracking Check Use Account Login, thenAs many times as you like Driving with Live Receive/Respond To Messages Text on the button is sent backHow CoPilot Uses GPS About GPS TechnologyData Corrections GPS AccuracyTrouble-shooting Using Help FilesSoftware Registration Phone +44 0207 404 Mail support@travroute.com.au, Phone Technical SupportReturn Policy For your return to be acceptedLimited Warranty TermGeneral Licencees ResponsibilityUS Government Restricted Rights Software Licence Agreement for Fonix Text to Speech EnginePage Licence Grant 104 Grant of Licence Licence Agreement for Whereis Data Property and Ownership

Pocket PC 5 specifications

TravRoute Pocket PC 5 is a robust navigation software that plays a vital role in transforming handheld devices into efficient travel companions. Designed specifically for Pocket PC platforms, it brings cutting-edge navigation technologies to users seeking a reliable way to explore new destinations.

One of the standout features of TravRoute Pocket PC 5 is its comprehensive mapping system, which offers detailed road maps for cities across the United States and Canada. Users can enjoy turn-by-turn voice directions, ensuring a hassle-free driving experience. The software utilizes a straightforward interface that simplifies route planning, making it accessible even for those who may not be tech-savvy.

In addition to standard navigation, TravRoute Pocket PC 5 incorporates advanced features such as route calculation based on real-time traffic conditions. This technology allows users to avoid congested areas, providing alternative routes that save time and reduce frustration. The software also includes a Points of Interest (POI) database, highlighting gas stations, restaurants, hotels, and other critical stops along the journey.

Another key characteristic of TravRoute Pocket PC 5 is its compatibility with external GPS receivers, enhancing its functionality by providing real-time location tracking. This integration allows users to maintain an accurate understanding of their position during travel, further bolstering the software’s navigation capabilities.

The program is designed to be resource-efficient, ensuring smooth operation on Pocket PC devices without overwhelming system capabilities. This efficiency is accompanied by a user-friendly design, with customizable settings that let users tailor their navigation experience according to their preferences.

Moreover, TravRoute Pocket PC 5 supports various travel modes, including pedestrian navigation, making it versatile for both drivers and walkers. By utilizing detailed street-level maps and a well-organized interface, users can easily plan routes whether they are exploring urban environments or venturing into the countryside.

Overall, TravRoute Pocket PC 5 serves as an essential tool for travelers. Its combination of robust mapping, real-time traffic integration, compatibility with GPS devices, and user-centric features make it a reliable navigation solution. As technology continues to advance, TravRoute Pocket PC 5 remains relevant, meeting the needs of today’s on-the-go consumers seeking efficient and effective navigation solutions.
Top Page Image Contents