Troubleshooting
What should I do when I type on the keyboard and nothing happens?
•Check that your PDA is charged.
•Make sure that your PDA is firmly connected to the Click N Type.
•Verify that the keyboard driver is installed on your PDA.
•Remove the keyboard driver and then reinstall it. To do this: 1 Tap Start, then select Programs.
2 Tap File Explore, then select My Device.
3 Tap Windows, Start Menu, then tap and hold Click N Type and select Delete from the
4 Tap Yes to remove the keyboard software, or No to cancel the operation.
5 Install the driver software, following the instructions in “Installing the Driver” on page 3.
Does the Targus Click N Type require batteries?
No — the keyboard uses only a small amount of power, which it draws directly from your PDA. Alternately, you can charge your PDA while using the Click N Type by connecting an AC adapter to the AC adapter port, located at the bottom of the keyboard.
What should I do if my PDA screen goes blank while I’m typing? (For Pocket PC 2002 users only)
To keep your PDA screen from turning off during use, turn off the backlight option. To do this:
1From the Settings Menu, select Power.
2Tap Adjust backlight settings.
3Select Turn off backlight so that the check mark disappears.
16