Reviewing Call Records, Deleting Calls

If your phone company sends information indicating that the incom-

ing call is long distance, appears.

REVIEWING CALL RECORDS

Each time you receive a call, the CID saves a call record that you can see while you are on the phone or review later. Each record in- cludes the time and date of the call, the order in which it was re- ceived, and the caller's telephone number and name (if available).

To scroll through the records, repeatedly press REVIEW 8 or 9.

Notes:

•If no call information is stored, NO CALLS appears when you press REVIEW 8 or 9.

•If you do not press a button within 20 seconds, the CID auto- matically returns to the time and date display.

•After you review all calls, -END OF LIST- appears. Press either REVIEW key to view the calls again.

DISPLAYED CALL INFORMATION

	Display (English,	Description
	French, Spanish)	Description
	French, Spanish)


	NEW CALL# XX	Appears as new calls are received.
	(all languages)	XX is the number of new calls.

		Appears if a new call comes in while
		you are using the phone. The NEW
		CALL indicator flashes.

	-PRIVATE CALL-,	The caller has blocked Caller ID
	APPEL PERSONNEL,	information from being sent.
	LLAMADA PRIVADA

	-END OF LIST-,	You have reached the end of your
	-FIN DE LIST-,-	call records. Press either REVIEW
	FIN DE LISTA-	key to see them again.

	-OUT OF AREA-,	The caller is not within a Caller ID
	-HORS ZONE-,	service area. No caller information
	-FUERA DE AREA-	appears.

	-ERROR-,	Appears if the Caller ID information
	-ERREUR-,	is garbled, or if there was an error
	-ERROR-	during the transmission of Caller ID
		information.

	NO CALLS, AUCUN	There are no call records in the
	APPELS, NO LLAMA-	CID's memory.
	DAS

		A message is waiting (if you sub-
		scribe to your phone company's
		message waiting service).

	PICKUP PHONE,	Appears after the CID dials a num-
	DECROCHEZ, LEVAN-	ber when you press CALLBACK (see
	TAR TEL	“Using Callback” on Page 4).

	SET AREA CODE,	Prompts you to set the area code
	CHOISIR ZONE,	(see “Connecting Power and Setting
	CODIGO DE AREA	Up the CID” on Page 2).

		Appears when you review a Caller ID
		record from someone who has called
		more than once from the same num-
		ber.

DELETING CALLS

Deleting a Single Call

Note: This procedure does not delete VIP and message waiting call records. See “VIP Call List” on Page 5.

1.Repeatedly press either REVIEW key until you see the call record you want to delete.

2.Press DELETE twice. The CID deletes that record and automati- cally renumbers the remaining call records. After 20 seconds, the time and date reappear.

Deleting All Calls

To delete all Caller ID records, wait until the CID shows the time and date, then hold down DELETE for about 4 seconds. ERASE ALL… flashes, then the CID beeps and the time and date reappear.

USING CALLBACK

When the CID displays a phone number you want to dial, press CALLBACK to automatically dial it. DIALING... and the phone number appear. After the CID dials the number, PICKUP PHONE appears.

To complete the call, pick up the phone within 4 seconds after you see PICKUP PHONE. If you do not pick up the phone within 4 sec- onds, PICKUP PHONE disappears and the CID does not complete the call.

To redial a number, press REVIEW 8 or 9 to select the number, then pick up the handset and press CALLBACK to dial it.

Notes:

•If the phone number's area code matches the area code you stored, press CALLBACK twice to dial the ten-digit number (area code plus the phone number). If you need to dial 8-digit number (1 plus the phone number) or 11-digit number (1 plus the area code plus the phone number), just pick up the handset and dial 1 then press CALLBACK.

•If the phone number’s area code does not match the area code you stored, the CID automatically dials 1 and the entire phone number. To set the CID so it does not dial 1 before dialing the phone number (for that call only), press CALLBACK twice.

•If you did not store an area code after installing the AC power, the CID displays SET AREA CODE 000, and the first 0 flashes. See “Connecting Power and Setting Up the CID” on Page 2 to store the area code. Then press CALLBACK to dial the number.

Calling the Last Dialed Number

To quickly call the phone number in the last call record you dialed, press CALLBACK while the time and date appear.

The CID displays DIALING... while it dials the number, then PICKUP PHONE. To complete the call, pick up the phone within 4 seconds after PICKUP PHONE appears.