Radio Shack SYSTEM 2100 owner manual Mounting the System

43-982.fm Page 16 Monday, August 16, 1999 5:01 PM

For Line 2 only

MOUNTING THE SYSTEM

You can place the System 2100 directly on a desk, shelf, or table, or mount it on a wall using the supplied mounting bracket and screws.

Follow these steps to mount the system on a wall.

1.Select a location near the phone line jack(s) and mark mounting screw locations 43/16 inches (106 mm) apart on the wall, side-by-side.

2.Drill two 1/8-inch holes in the wall at the marked loca- tions.

Note: For extra support, use the supplied wall anchors.

3.Thread a screw into each hole until the head extends 1/8 inch from the wall.

16