Removing AD3700 Modem, Windows and Vista

NOTE:

If you have trouble inserting the device into you computer’s USB port:

1.Verify that if you are inserting the device the proper way.

2.Verify that if you are using a Type-A USB port.

When you connect the AD3700, the following should occur once VZAccess Manager has been installed:

.	•	The modem is powered as soon as you connect it to Type A USB port of your computing device.
		Although the modem is powered, it does not automatically connect to the Internet.
.	•	The LED indicator on the device lights up.
.	•	If sound effects are enabled, the computing device may beep, notifying you that new hardware has
		been detected.
.	•	The VZAccess Manager Software starts (unless the auto-launch feature has been disabled).

Removing AD3700 Modem

The AD3700’s USB technology allows you to safely remove it from a Windows computer at any time when you are not connected to the network.

1.End your Mobile Broadband session by selecting Disconnect from VZAccess Manager.

2.Exit VZAccess Manager.

3.Simply grip the modem on both sides and pull straight out to avoid damaging the USB connectors.

- 9 -