Radio Shack CID-927 owner manual Setting the Display Language, Setting the Date and Time

43-927.fm Page 8 Thursday, June 24, 1999 9:36 AM

If you do not want the ringer to sound, set RINGER OFF/LO/HI to OFF. With the ringer off, you can still make calls (and answer calls if you hear another phone on the same line ringing).

SETTING THE DISPLAY LANGUAGE

The CID-927 is preset to show Caller ID messages in English. Follow these steps to change the language to French or Spanish.

Note: If you do not finish a step within 20 seconds and the phone exits setup, or if you make a mistake, start again at Step 1.

SETTING THE DATE AND TIME

Your phone company sends the date and time with each incoming call if you subscribe to Caller ID service. Or, follow these steps to set the date and time.

Note: If you make a mistake, simply start again at Step 1.

1.Press STORE. PROGRAM MODE appears.

2.Press REVIEW . -:--/- - with the date cursor flashing and SET DATE appear.

3.Enter the desired date using number keys. SET TIME appears and the hour cursor flashes.

4.Enter the desired time. =AM #=PM appears.

5.Press to select AM or # to select PM. The phone beeps and the set time display returns.

STORE

1.Press STORE. PROGRAM MODE appears.

2.Press REVIEW . SET LANGUAGE then 1=EN 2=SP 3=FR appears.

3.Press:

•1 to select English

•2 to select Spanish

•3 to select French

The CID-927 beeps once, then the cur- rent time display returns.

8

ADJUSTING THE DISPLAY CONTRAST

Repeatedly press CONTRAST on the back of the phone to adjust the display contrast. The CID-927 beeps once then the current time display returns.

CONTRAST