Phone Operation, Using Redial, Using Flash

43-927.fm Page 9 Thursday, June 24, 1999 9:36 AM

PHONE OPERATION

USING REDIAL

The redial memory holds up to 32 digits, so it can store both long-distance and lo- cal numbers. To redial the last number, lift the handset then press REDIAL.

REDIAL

Notes:

•The redial memory only stores the last 32 digits of any number dialed.

•The redial memory does not store a flash entry but stores any digits you press after FLASH (see “Using Flash”).

Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank- by-phone, require tone signals. If you have pulse service, follow these steps to use those special services.

1.Be sure TONE/PULSE is set to

PULSE.

2.Call the service.

3. When the service answers, press

. Any additional numbers you dial are sent as tone signals.

USING FLASH

FLASH performs the electronic equiva- lent of a switchhook operation for spe- cial services, such as Call Waiting.

FLASH

For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.

STORING AND DIALING PRIORITY NUMBERS

You can store emergency phone num- bers or the phone numbers you call most frequently in the three priority memory locations for one-touch dialing.

Each memory location can store up to 16 digits.