Radio Shack 420 owner manual Connecting to an Answering Machine

Page 14

43-971.fm Page 14 Monday, August 16, 1999 4:12 PM

2.Plug the triplex adapter into the modular phone jack.

3.Plug one end of the supplied modular cord into the TEL. LINE jack on one of the systems.

4.Plug the other end of the modular cord into either L1 or L2 on the triplex adapter.

5.Repeat Steps 3 and 4 to connect another system to the remaining open jack (L1 or L2) on the triplex adapter.

Connecting to an Answering Machine

1.Unplug the answering machine’s modular cord from its line jack and plug this cord into the system’s TEL. LINE jack.

2.Plug one end of the supplied modular cord into the sys- tem’s PHONE jack, then plug the other end of the cord into the answering machine’s line jack.

3.Set the answering machine to answer calls after at least two rings.

14

Image 14
Contents System Serial Number Features Important Information Read this Before Installation FCC StatementContents Care and Maintenance Installing Batteries PreparationFm Page 9 Monday, August 16, 1999 412 PM Connecting the AC Adapter Resetting the System Connecting to the Phone Line Connecting to a Single Phone LineConnecting to a Two-line Phone Connecting to an Answering Machine Setting the Time Adjusting the Display Contrast Caller ID ModeStoring Your Local Area Code Area CodeNew Calls OperationReceiving and Storing Calls Call Waiting Message WaitingForwarded Calls Repeat MessagesLong Distance Calls Out of Area Calls Line Error Private CallsReviewing Call Records Call RecordsName- or Number-Only Calls Dialing Numbers in Call Records Deleting Call Records VIP Call List Storing Call Records in the VIP Call List Turning On/Off the VIP Call Special Ring Reviewing and Deleting VIP Call RecordsDialing from the VIP Call List Care and Maintenance FCC Wants YOU to Know LightningRadioShack Limited Warranty