Radio Shack 350 owner manual Connecting to a Single Phone Line

43-959.fm Page 12 Monday, August 16, 1999 3:26 PM

CONNECTING TO A SINGLE

PHONE LINE

The system connects to the phone line and your phone using two modular phone-line connectors. If your phone does not have this type of connector, you can get the necessary adapt- ers at your local Radio Shack store. Or you can have the phone company update your phone wiring.

Note: The phone company can charge you to update phone wiring. The USOC number of the jack to be installed is RJ11C (for a single-line phone) or RJ14C (for a two-line phone).

Follow these steps to connect the system to the phone line.

1.Unplug the existing telephone’s modular cord from the modular phone jack and plug this cord into the system’s

PHONE jack.

2.Plug the supplied modular cord into the system’s TEL. LINE jack.

3.Plug the other end of the cord into the modular phone jack.

12