Nortel Networks 2212 manual Set Mode to Aggressive, Select Auth. Hash SHA1, Select Encryption 3DES

Page 61

Handset configuration Page 61 of 62

b.Set Mode to Aggressive.

c.Select OK.

8Set your password.

a.Select Network Config > Security > Static Entry > VPN > VPN

Client IP > IKE Mode Config > Phase 1 - ISAKMP > Preshared Key > Alphanumeric.

b.Enter your password.

c.Select Save.

9Set the Phase 1 authentication parameters.

a.Select Network Config > Security > Static Entry > VPN > VPN Client IP > IKE Mode Config > Phase 1 - ISAKMP.

b.Select Diffie-Hellman > Group 1.

c.Select OK.

d.Select Auth. Hash > SHA1.

e.Click OK.

f.Select Encryption > 3DES.

g.Click OK.

10Set Key ID.

a.Select Network Config > Security > Static Entry > VPN > VPN Client IP > IKE Mode Config > Phase 1 - ISAKMP > Local ID > Key ID.

b.Enter the key ID.

c.Click Save.

11Set Phase 1 Lifetime.

a.Select Network Config > Security > Static Entry > VPN > VPN Client IP > IKE Mode Config > Phase 1 - ISAKMP > Lifetime (sec).

b.Enter 2678400.

c.Click Save.

12Set Phase 1 Options.

a.Select Network Config > Security > Static Entry > VPN > VPN Client IP > IKE Mode Config > Phase 1 - ISAKMP > Options.

WLAN Handset 2212 Installation and Configuration for VPN

Page 60 Page 62
Image 61
Page 60 Page 62
Contents
Wlan Handset Installation and Configuration for VPNPage November Revision historyStandard 1.00 November Contents IP address pool configuration List of procedures 8 of 62 List of procedures Getting Help from the Nortel Web site How to get helpGetting Help through a Nortel distributor or reseller Subject About this documentApplicable systems For more information, see one or more of the following NTPs System migrationConventions Intended audienceMeridian 1 PBX 61C Meridian 1 PBX 81C Related informationOverview ContentsIntroduction Scope of this document Code and key code requirementsThin AP L2 Away from VPN Router Configuration in this document18 of 62 Overview Getting started Configuring the Contivity VPN routerClick Device Manager COM1 settings Main Menu Private Trusted Interface Interface menuManagement IP Address Interface IP Address Subnet Mask Default Private Route MenuClick Manage Switch End of Procedure IP Services Gateway homeUse Procedure 2 to install licence keys Installing the Licence KeysProcedure Installing licence keys Key InstallationGetting started Page 27 Click OK 28 of 62 Getting started Standard 1.00 November Procedure Disabling the Dhcp server This section describes how to set the Dhcp optionsDhcp options Dhcp serverChecking connectivity Procedure Enabling the Dhcp relay Use Procedure 4 to enable the Dhcp RelayDhcp relay Dhcp Relay options32 of 62 Dhcp options Use Procedure 5 to configure an IP address pool IP address pool configurationProcedure Configuring an IP address pool IP address poolsAdd an IP address pool Proxy ARP and tunnel-to-tunnel traffic Procedure Enabling proxy ARP and tunnel-to-tunnel trafficEnter a Subnet Mask Address poolSelect Allow End User to End User Forwarding optionsUse Procedure 7 to set IPsec global variables This section describes how to work with IPsec detailsProcedure Setting IPsec global variables IPsec options and groupsIPsec global variables Procedure Defining a Wlan Handset 2212 group Use Procedure 8 to create a Wlan Handset 2212 groupWlan Handset 2212 group definition Add groupsGroup details Wlan Handset 2212 group IPsec variablesIPsec options and groups Page 41 IPsec variables Connectivity section Click Configure in the Connectivity sectionIPsec variables IPsec section Accept Forward Secrecy Compression End of Procedure Use Procedure 10 to add a user account Users, interface and firewall configurationProcedure Adding a user account User accountsAdding users User details User Accounts section, enter a User ID and PasswordUse Procedure 11 to configure the second interface Second interface configurationProcedure Configuring the second interface Configuring second interfaceUsers, interface and firewall configuration Page 49 Cancel acquisition Click Cancel acquisition Select protocol Use Procedure 12 configure the firewall Firewall configurationProcedure Configuring the firewall Firewall policies Edit firewall policy New policyOverride Rules Default Rules Select Manager CSF/NATEnd of Procedure Configuring the handset Handset configuration This section describes how to configure the Wlan Handset Config Cradle window Procedure Configuring the Wlan Handset 2212 using the cradleProcedure Config Cradle with VPN SettingsSelect Phone Config License Option Configuration menuSelect Network Config IP Addresses Use Dhcp Select Auth. Hash SHA1 Set Mode to AggressiveSelect Encryption 3DES Select Init Contact Select Nortel featuresSelect IP Subnet Page Wlan Handset Installation and Configuration for VPN
Related manuals
Manual 61 pages 14.58 Kb Manual 61 pages 1.66 Kb
Top Page Image Contents