Page 62 of 62 Handset configuration
b.Select Init Contact.
c.Click OK.
d.Select Nortel features.
e.Click OK.
13Set the Phase 2 authentication parameters.
a.Select Network Config > Security > Static Entry > VPN > VPN Client IP > IKE Mode Config > Phase 2 - ESP.
b.Select Auth. Hash > SHA1.
c.Click OK.
d.Select Encryption > 3DES.
e.Click OK.
14Set IP address and subnet.
a.Select Network Config > Security > Static Entry > VPN > VPN Client IP > IKE Mode Config > Phase 2 - ESP > Remote Network.
b.Select IP Address.
c.Set the IP address to that of the VPN router.
d.Click Save.
e.Select IP Subnet.
f.Set the IP subnet to that of the VPN router.
g.Click Save.
15Set Phase 2 Lifetime.
a.Select Network Config > Security > Static Entry > VPN > VPN Client IP > IKE Mode Config > Phase 2 - ESP > Lifetime (sec).
b.Enter 2678400.
c.Click Save.