Operating your JV35
E
HOLD
PROG BOOST MEMORY REDIAL
TONE Lo | Hi | VOL |
Fig. 19 - PROG Button
2.Enter the phone number as you would normally dial it.
Fig. 20 - Entering
Number
3.Press the PROG button again.
4.Press MEMORY, then one of the number buttons: 0, 1, 2, 3, etc.
Note: # and * keys are not available for this function.
5.Hang up the handset.
6.The number is now stored within the number button you selected.
7.To change a stored number or to program another memory button, repeat this process from step 1.
N G L I S H
12