Clarity JV35 manual Tone Pulse

Page 24

E

N

G

L

I

S

H

Operating your JV35

RINGER		ANNOUNCEMENT	AUDIO
Lo Med Hi	Tone Pulse	Preset Prog Custom	OUTPUT

Fig. 22 - Announcement Switch

3.Press the desired Emergency button. After the “beep,” speak into the handset to record an announcement like “Police” or “Fire” for that button. Your recording can be up to three seconds long.

JV35

Fig. 23 - Emergency Button

4. After three seconds there will be a “beep” to tell you recording has stopped. Your recording will be played back immediately so you can check it, followed by a “beep-beep” sound.

5.Now you can repeat steps 3 and 4 if you want to change your announcement or if you want to record an announcement for a different Emergency button.

6.Otherwise, when you are finished recording, hang up the handset.

14

Image 24

Contents JV35 Contents Operating Your JV35Page Important Safety Instructions Important Safety Instructions If the telephone does Disposal instructions Additional Safety Notes for Canadian Users Viii Instructions Introducing the JV35 Package Checklist User GuideFeatures on the JV35 Base Unit ControlsInstallation Repositioning the hookPhone base installation for wall mounting Battery installation Boost Button Adjust the VOL control to suit your hearing Operating your JV35OFF Boost Button Adjust the Tone selector to suit your hearing Response Lift the handset Press Prog button RedialPress Prog button again Press the Prog button again JV35 comes with Tone Pulse Programming Announcement Operating your JV35 Played when you press a Memory button When you are Hang up Handset SlidePreset Announcements Audio Output Port Location Operating your JV35 Troubleshooting Chart ActionSpecifications JV35 Physical Dimensions